Joseph Montalto
Active member
Just bought a Hydrogen on eBay with a bad IMEI number. Hopefully you don’t need an activated hydrogen to use the Komodo.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
What an interesting update with just a single photo.
So it looks like with the first KOMODO tease photo that showed a mirrored headphone jack and what looked like a CFAST slot was actually a shot on a reflective surface.
And now we know the heatsink on the left side of the camera. The headphone and mic placement looks great for the microphone, especially if the M4 screwpoint is signifying that either ribs or cages are on the way for this thing for side mounting a shotgun mic.
Now, the big question proposed is the big red button.
That first tease only showed us that there seemed to be a little bit of a gap next to the heatsink. I had assumed that it was a sliding battery release, but now it looks like the red button is taking that role.
It seems odd to have the CFast indicator there without a card slot nearby though. That leads me to believe that this might be a hatch that opens up to reveal a card slot and maybe a battery slot.
I'm a little unsure on the battery slot as unless this is significantly less power hungry, that would be a lot of battery swaps with that small of an area.
The bottom of the camera appears to have the usual RED mounting, which is a nice nod for current accessory compatibility (at least on one level).
My prediction of this being 4K was clearly wrong and I'm glad. I think it's interesting that there were barely any 6K predictions, most were either 8K, 5K, or 4K.
I still feel pretty confident in saying this is a 3:2 FF sensor. The sensor just looks too close to the mount to be S35, even with the angle.
With today's RF mount confirmation, I actually went and found a video with a closer angle and here's how it lines up:
![]()
I didn't throw the sensor lines on this time, but once that angle is just about lined up it's about as dead on of a match as you can get.
So we're looking at a 6144x4055 sensor (24.9 Megapixels) with roughly a 6 micron pixel pitch (5.85 to be exact).
That's 271 MB/sec at 3:1 compression while recording 6K 3:2 24fps.
24 FPS at 5:1 is 163 MB/sec.
60 FPS at 8:1 is 254 MB/sec.
I still feel like we're looking at regular R3D and not R3D-lite, but either way it's probably best to wait and see what CFAST cards RED is throwing the seal of approval onto.
Last thing of note, is that there aren't any holes for screws to get to on the left (right while facing forward) side of the sensor. So my curiosity toward what the one we've seen in two pictures for now remains.
Oh, and also the external ND EF adapter probably means that we're not getting Internal ND's.
The short list of stuff we know for sure thus far about Komodo.
- It's the least expensive RED camera to date, sub $5K for Hydrogen Owners. Don't know final price yet.
- It's tiny and lightweight as per the first post
- Jarred's last post confirmed the lens mount is indeed Canon EOS R / RF Mount
- The Variable ND shown in the last image posted is the Canon EOS R > EF w/ Built in Variable ND and you can remove that tray for "clear" with the clear insert. There are 3rd party options as well on this front if you want to go nuts btw.
- Media, I think it's safe to say CFAST 2.0 after the tease, but I do wonder if there could be more possibilities perhaps?
- We now know Komodo is 6K, which if RED is keeping to their own logic likely comes to a 6144x???? resolution sensor. There have been two 6K FF format sizes in the past, one with a height of 3160 and the other 3240 pixels tall. However, we don't know the actual aspect ratio of the sensor yet.
- This is the shortest flange depth mount RED has ever supported
The mystery stuff is:
- We don't know the format size, aspect ratio, and resolution of the actual sensor
- Maximum FPS or even what it records. REDCODE RAW? A new flavor of ice cream? ProRes?
- We don't know how to power it yet
- We don't know anything about monitoring, though speculation is pretty wild on the book of face
- Actual delivery date, that's of course not announced officially yet, but this year means this year I think in this case
- Actual Price Point and what it needs to get up and running
There's honestly a lot we don't know
- We don't know anything about monitoring, though speculation is pretty wild on the book of face
Where are you getting the resolution from? I would guess it's the same sensor in the A7III, Kinefinity Mavo LF, Z-Cam 6K FF, etc. I would not be surprised if Blackmagic is going to build a camera with the same sensor. Blackmagic's next cam may be a FF pocket with VARI-ND using the same sensor.
What's most shocking of all is, if this camera hovers around the +- $5000 point, this is significantly cheaper than even the Kinefinity MAVO LF.
We now have an answer to this question..... or at least part of an answer:
I am very excited that Jarred Land is letting me share the next little reveal on the new Red Digital Cinema Komodo 6K Camera. This thing just gets cooler and cooler. A tiny powerhouse.
The interesting thing is, what Komodo will have to do with Hydrogen 2? Thinking of how Hydrogen was marketed, if Komodo is the answer to that, then Jarred is used to end up with a waistcoat whenever he goes to shop for a jacket. :smile: So, it sounds like there's much more to be revealed in this story.
The short list of stuff we know for sure thus far about Komodo.
- It's the least expensive RED camera to date, sub $5K for Hydrogen Owners. Don't know final price yet.
- It's tiny and lightweight as per the first post
- Jarred's last post confirmed the lens mount is indeed Canon EOS R / RF Mount
- The Variable ND shown in the last image posted is the Canon EOS R > EF w/ Built in Variable ND and you can remove that tray for "clear" with the clear insert. There are 3rd party options as well on this front if you want to go nuts btw.
- Media, I think it's safe to say CFAST 2.0 after the tease, but I do wonder if there could be more possibilities perhaps?
- We now know Komodo is 6K, which if RED is keeping to their own logic likely comes to a 6144x???? resolution sensor. There have been two 6K FF format sizes in the past, one with a height of 3160 and the other 3240 pixels tall. However, we don't know the actual aspect ratio of the sensor yet.
- This is the shortest flange depth mount RED has ever supported
The mystery stuff is:
- We don't know the format size, aspect ratio, and resolution of the actual sensor
- Maximum FPS or even what it records. REDCODE RAW? A new flavor of ice cream? ProRes?
- We don't know how to power it yet
- We don't know anything about monitoring, though speculation is pretty wild on the book of face
- Actual delivery date, that's of course not announced officially yet, but this year means this year I think in this case
- Actual Price Point and what it needs to get up and running
Interestingly since there's a known quantity within the teased images you can really speculate and extract a good educated guess on that sensor size, but I'm not going to blast my theories around because a lot more is going on in the gate it seems.
There's honestly a lot we don't know, but so far it's looking like a little rugged camera that likely will make it's way onto productions even, possibly replacing the need for certain other cameras in those scenarios as it's the first thing RED has pushed out that is this small.
On a personal note, I'm super happy with this new mount in a big way. It's super easy to adapt to and as shown you can do fun things like behind-the-lens ND.
At the moment I'm really, really curious about exactly what this sensor can do and how I can deploy it on shoots.