Wifi +1 module, Syndicated.

[Mikael Lubtchansky]

I might be wrong but some sort of TC comes trough with Foolcontrol, no? But may I ask, why would you need timecode?

REDLink protocols only sends TC every second, and over wifi it looks fine but is not frame accurate for audio or multicam syncinc.

Timecode Buddy guys figured out the TC over wifi and they are indeed coming with a new module soon (pulse) that will also work with foolcontrol... Stay tuned, will post more when I have more details.

 

[Björn Benckert]

Posted this in another thread. IF you want to make these things here is the needed info.

Make your own built in wifi connection...

https://vimeo.com/112315766


https://serialio.com/products/wifi/w...dule-xv-w-wire
http://www.red.com/store/products/4-...to-flying-lead

This is probably not something to fiddle with while your camera is on warranty... but as I remembered we stole power by the connector for the lemo power (the red and black cable on attatched photo). And then drilled a little hole in the bottom of the +1 and let just enough of the lemo CTR cable hang out there to reach straight into the CTR port of the camera (just the same way as the +1 steals the HDMI port) Then we shrinked wrapped the wisnap 322 board and left it inside the +1, it's a tight fit, But if you do it right it should fit suggly right next to those black cables.

The shit part to get it working was to configure the wisnap board. You have to have a PC with a RS232 connector, Those you can by as a little dev kit and cost only a couple of bucks. But I think if somebody would make a group buy for the wisnapboards then they can possibly do a "red/foolcontrol" configuration at the factory. We used a little configurator from serialo but it was quite a mess. some of the settings did not work etc. There is a Marshall Langford <marshall at serialio dot com> He helped us quite a bit I think he would be the guy to ask, but not sure mentioning my name would be any help because I think he got pretty tired of me asking a million and one questions about this little card that I paid pennies for and had no knowledge what so ever how to configure

Also I did not test but to up the Wifi reach another card might be better: https://serialio.com/products/wifi/w...odule-xv-u-ufl
as it can be used with an external antenna. It would be quite simple to drill a hole in the top, or on the side, of the +1 and attach a little SMA connector and then something like these:

http://www.digikey.com/product-detai...SMA-ND/1793607
https://serialio.com/products/wifi/w...larity-sma-pin

But then again it's possible to simply just make a very small hole and let the antenna cable of the embeded version (below link) stick out a little, that gives you plenty of reach.

https://serialio.com/products/wifi/w...dule-xv-w-wire


And it has to be said, the above worked great on our camera, but I give no warranty the above will work or not harm your camera, and I'm pretty sure as soon as you open the +1 it voids all your RED warranties.

So if you want to play, but want to play safe then you leave the wisnap out of the +1 module and power it with a Dtap or lemo just like the hotlink.
Looking something like this: https://www.facebook.com/photo.php?f...type=3&theater

Or just order the weapon upgrade,

 

[Patrick Grossien]

Since Björn's links don't work - probably because of copy/paste, here's the link to his original post:
http://www.reduser.net/forum/showthread.php?131912-Module-adapter&p=1509729&viewfull=1#post1509729