Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

WEAPON / DJI RONIN

luigivaltulini

Well-known member
Joined
Oct 26, 2009
Messages
2,524
Reaction score
0
Points
36
Location
Switzerland- LUGANO
Website
www.cine5k.ch
Hey guys,
With Jetpack Expander can take power from the Ronin and I can use WEAPON and the Cinegears focus together?
I try to understand if the battery of RONIN can do it?

thanks
 
Yep! Clyde (from RED) was demoing this set-up at the show. ...not sure if it was a Ronin or a MŌVI.

...not sure about cinegears. The Demo had a Element Technica two Chanel (prototype) controller that controlled focus and iris through the RED mount. It was a little buggy but still pretty freakin sweet!
 
The set up at the show was a ronin and I believe the camera was powered from a lipo strapped under the camera. Focus was internally on a canon lens.

Apologies then, Luigi. I thought it was the rig. ...original post edited.
 
The set up at the show was a ronin and I believe the camera was powered from a lipo strapped under the camera. Focus was internally on a canon lens.

Phil,
so you're telling me that the camera was powered by a separate battery and not from the battery of ronin?
I do not understand then what can serve this Jetpack!
In the post Mikael I can guess that the focus gears with DTaP (i hope) , but the Weapon where to take power?

https://www.facebook.com/mikael.lubtchansky/posts/719888391455883?pnref=story
 
RONIN + JETPACK WEAPON and prototype FOOLCONTROLER focus/iris knobs with start stop, range limits, custom button mapping etc...
Proto box made with amazing guys at RVZ using RTMOTION knobs.

Clyde is taking the unit I had in the booth to Coachella duting the week end to field test it...
 
RONIN + JETPACK WEAPON and prototype FOOLCONTROLER focus/iris knobs with start stop, range limits, custom button mapping etc...
Proto box made with amazing guys at RVZ using RTMOTION knobs.

Clyde is taking the unit I had in the booth to Coachella duting the week end to field test it...

Hi Mikael,


That will be one special type of "Field Test..."

If this proofs out, Will the kit likely be available concomitant with Weapon rollout?



Thank you very much

Fury
 
Hi,

Bit of digression but can anyone chime in with knowing if the new Ronin M will work with Dragon Epic once stripped down to just ssd module, canon mount and canon L 24mm lens?

cheers,

Craig Lees
ED UK
3dstories.co.uk
 
Ronin M - yes will handle the Dragon/Weapon - was being demo'd on the NAB floor and pretty sure that was the setup that Clyde was running in the RED Booth.
 
I found this.

The Weapon is supplied from a lipo ....
I do not understand what configuration is !! Better a normal Dragon with sidehandle and redvolt.
It would have been very nice if you could feed all the Ronin.

wea_zps7hnyibki.png
[/URL][/IMG]

10665322_950661628287173_1428622971_n_zpsvu9kwcoe.jpg
[/URL][/IMG]
 
Ronin M - yes will handle the Dragon/Weapon - was being demo'd on the NAB floor and pretty sure that was the setup that Clyde was running in the RED Booth.
I understand most are curious mostly for the Weapon in this thread. But how would one go about running a current Dragon on the Ronin M with power other than the RV or Brick to keep the weight in check?
 
RONIN + JETPACK WEAPON and prototype FOOLCONTROLER focus/iris knobs with start stop, range limits, custom button mapping etc...
Proto box made with amazing guys at RVZ using RTMOTION knobs.

Clyde is taking the unit I had in the booth to Coachella duting the week end to field test it...

Add to that our "GI" V-lock (and potentially Gold mount / LiPo) and you are all set...

:sifone: Peter
 
I understand most are curious mostly for the Weapon in this thread. But how would one go about running a current Dragon on the Ronin M with power other than the RV or Brick to keep the weight in check?

Current Epic / Scarlet are too heavy for the M Ronin - you need to use the "normal" Ronin.

The M Ronin was developed to serve cameras in the weight category bellow Epic / Scarlet. Otherwise it would just be Ronin "2". The current Ronin (non M) has some of the highest payload capacity in the industry at 16 lbs - the Ronin M can fly 8 lbs. Think of the Ronin as the Movi M15 (Ronin "L") and the Ronin M as the Movi M10 (the M stands for "medium"). I personally think this is good move by DJI as it leaves room for Ronin S to be developed later for the smallest cameras like GoPro and compact point-and-shoot varieties. And eventually an XL model for full-size pro cameras like Alexa, Varicam, etc...

Weapon just happens to be small and light enough to be carried by the Ronin M in a limited weight configurations (forget using cine zoom lenses). The Ronin M was not developed specifically for it...

:sifone: Peter
 
Current Epic / Scarlet are too heavy for the M Ronin - you need to use the "normal" Ronin.

The M Ronin was developed to serve cameras in the weight category bellow Epic / Scarlet. Otherwise it would just be Ronin "2". The current Ronin (non M) has some of the highest payload capacity in the industry at 16 lbs - the Ronin M can fly 8 lbs. Think of the Ronin as the Movi M15 (Ronin "L") and the Ronin M as the Movi M10 (the M stands for "medium"). I personally think this is good move by DJI as it leaves room for Ronin S to be developed later for the smallest cameras like GoPro and compact point-and-shoot varieties. And eventually an XL model for full-size pro cameras like Alexa, Varicam, etc...

Weapon just happens to be small and light enough to be carried by the Ronin M in a limited weight configurations (forget using cine zoom lenses). The Ronin M was not developed specifically for it...

:sifone: Peter
The body is 5lbs add in a light lens like a rokinon and it'd fit wouldn't it? I thought someone was saying earlier that there was a demo of it at NAB, maybe it was just a Weapon.
 
If the monitor is attached by cable to the 'fixed' handlebars (from Luigi's post #11) ... what is the benefit of strapping a LiPo battery underneath the camera?

+) Why not use the wires to put the lipo battery on the fixed handlebars ... and make the package lighter?

+) Is there an iOS version of Google Glass that can project what is in the Camera Frame + Wireless HDMI input? Would this be a more effective setup than having a large monitor screen on the handles? (I'm a complete newbie .. just trying to work out what the ideal setup might be)

AJ
 
Being that the jetpack expander is, essentially, built-in to Scarlet/Epic, wouldn't it be just as light?

The Ronin-M weight limit is 8lbs, I think... So as long as you're within that weight limit, you should be good to go, no?

I would hope that the ET EF Focus unit works with DSMC via REDlink or HotBox... Mikael can you confirm that?
 
Being that the jetpack expander is, essentially, built-in to Scarlet/Epic, wouldn't it be just as light?

The Ronin-M weight limit is 8lbs, I think... So as long as you're within that weight limit, you should be good to go, no?

I would hope that the ET EF Focus unit works with DSMC via REDlink or HotBox... Mikael can you confirm that?

My proto box to use thumbwheels for iris/focus/startstop works as well on WEAPON and EPIC / SCARLET.
Clyde should soon post some feedback from his testing during week end at Coachella but I heard it was a treat...
Looking into the various production options to make this solution available at the soonest since everyone who tried it wants one right now :-)
 
My proto box to use thumbwheels for iris/focus/startstop works as well on WEAPON and EPIC / SCARLET.
Clyde should soon post some feedback from his testing during week end at Coachella but I heard it was a treat...
Looking into the various production options to make this solution available at the soonest since everyone who tried it wants one right now :-)

Great MaN ;)
 
Back
Top