RCX PRO Build 11 Beta and Epic/ Scarlet Camera build 3.0 (release)

[Elsie N]

Did you disconnect the internet or wireless connection, on my Mac I have to do that to update the firmware on the REDMOTE..worked for me on a Mac, not sure about PC.

As you suggested, I tried disconnecting the internet and this computer has no wireless connection. My next attempt will be to try to install it on a x32 computer. Thanks for the input.

 

[Paul Kalbach]

In my eagerness to upgrade to v3, I totally forgot to remove both my side handle and the RedMote. It seems to have survived without any issues though. I didn't even have to upgrade the RedMote. Was it upgraded during the v3 upgrade by being attached?

It wasn't my imagination or wishful thinking after all: the Bomb EVF blacks are definitely less milky now with RedGamma3 enabled in camera! THANK YOU RED TEAM!!!
I can also make the blacks in the EVF as rich as I want with a slight tweak to LOOK/FLUT/SHADOW. I find that with RedGamma3 and Shadow tweaked to around -0.2 makes the Bomb EVF look pretty nice, but is a little heavy on the blacks for the Touch LCD. It would be nice if factory default setting gave the same blacks for both the Bomb and Touch. On the other hand, the black pluge in the SMPTE Bars test signal looks correct when viewed on a properly setup external monitor, but it is entirely too light on both the Bomb and Touch even with the brightness turned all the way down. It's The Great Black Puzzle....

 

[TheBied]

In my eagerness to upgrade to v3, I totally forgot to remove both my side handle and the RedMote. It seems to have survived without any issues though. I didn't even have to upgrade the RedMote. Was it upgraded during the v3 upgrade by being attached?

The REDMote upgrade is a separate upgrade procedure. The installer is included in the package you downloaded from the website. The previous version is compatible with 3.0.0, but we've rolled in a few bug-fixes into REDMote 2.0.9.

 

[Elsie N]

I've tried everything I know on 3 machines to install the Redmote firmware updater. It's either do without my redmote or revert back to build 2.0.8.

 

[Elsie N]

The REDMote upgrade is a separate upgrade procedure. The installer is included in the package you downloaded from the website. The previous version is compatible with 3.0.0, but we've rolled in a few bug-fixes into REDMote 2.0.9.

It still works with the new camera firmware? That's great! But I really hope someone can figure out why the redmote updater won't install, at least on my machines.

 

[Daniel Stilling]

Resetting the user settings during an upgrade will help keep incompatible settings between versions from causing problems. Hopefully as the firmware matures there will be less need for this. But for now it is for your own good.

For now, you can create a key mapping preset, export it to SSD, and then reapply your mappings after upgrading the firmware.

Thanx for the heads up. I guess I need to do a little more reading...

 

[Paulo Kobayashi]

It still works with the new camera firmware? That's great! But I really hope someone can figure out why the redmote updater won't install, at least on my machines.

I had the same issue. Just click the right mouse button and choose "run as administrator" and voila.

Good Luck.

 

[Elsie N]

I had the same issue. Just click the right mouse button and choose "run as administrator" and voila.

Good Luck.

Yeah, been working with Trent Lillehaugen offline and he suggested that. Everything worked fine after that. Thanks Paulo.

 

[Elan Gunos]

You guys are scary fast, I'm testing out the test build Matthew sent and it's working great on 10.5.8. This new version is amazing!

We've identified the crash issue on 10.5 and have been working on a fix. We should have a build soon for you guys that are having issues to try so you can tell us if it fixes this issue!

 

[Sean Cruser]

super exciting, thou i am a bit sad i won't have instant playback for my 5k ANA shoot this weekend. oh well, i'll survive with the fabulous imagery.

 

[robert browning]

Where did you get this amended version of 11?

 

[Rob Anderson]

Everything looks great but I'm getting a constant crash on attempt to render. See this log file:

 

[Rob Anderson]

Everything looks great but I'm getting a constant crash on attempt to render. See this log file:

After a couple hours of trying to pin this one down it looks like a repeatable crash bug when trying to export resolution based on "Clip". Specifying clears up the problem. Hopefully fixed soon! Thank you.

 

[stu aull]

So I have, seemingly successfully, installed CXP11, but don't see an ops manual. The "help" menu in CXP shows this as grayed out and I don't see a .pdf anywhere.
??

Stu Aull
S-X #00199
Alaska

 

[Steve Sherrick]

So far, RCX 11 working well. Also, new FCP 3 Color plugin is pretty sweet. Best playback I have had using 4K material in Color. Nice surprise there. Here's a few quick cracks at RC3/RG3

 

[David Ibbitson]

Thanks Rob,

We'll take a look.

Cheers,
David

After a couple hours of trying to pin this one down it looks like a repeatable crash bug when trying to export resolution based on "Clip". Specifying clears up the problem. Hopefully fixed soon! Thank you.

 

[David Ibbitson]

Hi Stu,

Can you please clarify? Do you mean RCX 11? Can you post a screenshot of what you are seeing?

Thanks!
David

So I have, seemingly successfully, installed CXP11, but don't see an ops manual. The "help" menu in CXP shows this as grayed out and I don't see a .pdf anywhere.
??

Stu Aull
S-X #00199
Alaska

 

[robert browning]

Can anyone tell me where to get this version of version 11 that work for mac os 10.5.8? Thanks.

 

[David Ibbitson]

Robert,

It's not publicly available until we've confirmed the fix. Email redcinex at red dot com and we'll sort you out.

Cheers,
David

Can anyone tell me where to get this version of version 11 that work for mac os 10.5.8? Thanks.

 

[Steve Sherrick]

This is what happens when you mix chlorine with RC3/RG3.