Picture of a Weapon

[dio Zafi]

..+1

 

[Antony Newman]

EDIT : Looks like there are some images of mount connected flush the the front of the camera - makes the following an even more unlikely proposition

- - - - -

New 'out there' thought.

+) The new fan in the Weapon Sucks ... but also Blowsup.
.. It Can't suck in air from the front of the camera any more.
.. It doesn't have as many things to cool down.
.. fans facing up means less white noise towards the tallent.

+) The reason there is no Mount in the picture ... is because the Mount is ATTACHED to the Dragon sensor..

+) I am going to speculate that the Screen in JLs 4x4 was not on an Umbilical cord.
.. If Red didn't implement a Wave2 802.11AC (which admittedly consumes quite a bit of power) .... that it was in fact the Dragon + Lens was on a Leash to the front of the vehicle where Skull was located.

Red : Not content with being 'visionaries .... they want the Weapon's to lead the pack. Arri may have punched through the 3k barrier ... but Red are always going to be 3m in front

AJ

1024346[/URL]"]1024346[/URL]"]1024346[/URL]"]1024346[/URL]]<snip>
+) Introduce a 'Red Eye' concept in which at most two sensors can been connected by thunderbolt connectors to the Brain (1.25 GB a sec down).
These eye modules would only compose of a sensor, lens activation circuit, cooling circuit and transceiver.
-> Red brain could go in back pack - and connect to the two 'Red Eyes' by a two TB umbilical chord.
-> weight of eye could be as little as 750 g - excluding lens.
-> optional power cable if not bus power-able over TB
-> Lens directed info could include FIZ data
-> New Red lenses with inbuilt digital motors would be the perfect compliment.
-> Small width of Red Eye could allow two lens next to each other (3d rigs)
FIZ data for rig to maintain 2 x lenses at required distance apart.
-> First Red Eye to use 32Mpix x 5 micron FF sensor (Dragon tech)
<snip>
AJ

 

[Brian Boyer]

Why do people keep saying there's no mount in that picture? Is the mount I'm seeing just my imagination?

 

[Frederik Lindstrøm]

Did u guys forget this picture of the Weapon...?

 

[Kemalettin Sert]

Did u guys forget this picture of the Weapon...?

that one posted many times of course
did you see this one?

Fans :-(

 

[Frederik Lindstrøm]

Yeah but all this lens mount talk

 

[Bob Gundu]

I'm curious about the Lemo Adapter location on the camera?

 

[Clark Dunbar]

the lemo adapter has pins on the bottom - so guess it would attach at the new monitor location - shown in the pic the other day.

 

[Jeffrey Loewe]

I'm curious about the Lemo Adapter location on the camera?

Looks to me like this attaches directly to the top of the body and allows you to adapt your current monitor system to the camera whether its the current 5", 9" or EVF.

 

[Bob Gundu]

Clarke and Jeffery, yes that does seem to be the case. I wonder if the lower image is the same thing except it's for the newer, to be released monitors who want to connect them with wire off the camera body?

 

[Bob Gundu]

Now, with these new connection on the top of the camera, will new top plates still be adaptable? Those connectors look pretty shallow on the Lemo adapter. Hmmmm

 

[Jeffrey Loewe]

Now, with these new connection on the top of the camera, will new top plates still be adaptable? Those connectors look pretty shallow on the Lemo adapter. Hmmmm

Guess we'll have to wait and see until Jarred spills more beans.

 

[Jordan Buck]

I assume once we see the top of the body properly without a handle without a monitor then 3rd parties will be able to design top plates that sit around connection points meaning the lemo adaptor could then be added on, I have a feeling top plate wise we are going to have a little less real estate on this body

 

[Bob Gundu]

I assume once we see the top of the body properly without a handle without a monitor then 3rd parties will be able to design top plates that sit around connection points meaning the lemo adaptor could then be added on, I have a feeling top plate wise we are going to have a little less real estate on this body

Or the weapon is going to be so complete we won't be attaching anything else :smile:

 

[R. Gonzales]

Bob,

I don't think the bottom image is part of the lemo adaptor. I think its something else, but I've been wrong before, LOL.

My guess ... some sort of eyepiece leveller.

 

[Scott Crawley]

Well I'll jump into the deep end with a crazy thought....

That is a bold vision indeed.

I suspect you may have to wait a while longer, but wow if you are correct....!

 

[Scott Crawley]

Let's talk about that lower image, shall we?

It isn't Lemo, and what are the red and black wheels for? At first glance they look like counter threaded locking nuts, but what would they be locking down that might have a connector sticking out of it? What is that pin @8 o'clock on the red wheel/dial?

We can't see a groove for locking in an antenna or BNC connection. Could it be BNC?


An EVF leveling device... Interesting. I am beginning to see that, I guess.


Could it be a detachable accessory of some other kind... A la Redmote? How about a focus and iris ring for lenses with internal motors? I don't know what the connector would be for in that case... MAYBE a conventional whip for on camera use or antenna. Lol that one is a stretch, eh?

I'm curious about the Lemo Adapter location on the camera?

 

[Nikhil Kamkolkar]

Or the weapon is going to be so complete we won't be attaching anything else :smile:

Yes please. Although the flexibility is a plus in some cases, 90% of the time I feel like I'm creating a frankenstein, and all that flexibility is a pain when you work with crews who may not be all that interested in diving deep and figuring out all the ways possible to rig it up to a basic level of functionality.

 

[Bob Gundu]

I'm sticking to my guns and say the bottom image is for the new monitors that will have different connections for when you need to connect it off camera.

 

[Scott Crawley]

I'm sticking to my guns and say the bottom image is for the new monitors that will have different connections for when you need to connect it off camera.

So that provides an interchangeable connector for the new connector-less monitor? Black nut secures to the monitor and red nut secures choice of connector?

OK