Inexpensive gadgets and accessories you can't do without.

[Adrian Weinbrecht]

I'm sure everyone is using something like this already, but for a quick setup we use these Novoflex plates for LCD monitors and Proxy recorders (SD Pix240 and Samurai Blade)

I think they are cheap/good value for the quality, link below:

http://tinyurl.com/ppq45hk

 

[Abiodun Shote]

Anyone got an idea for a cheap cage (top & bottom plate mainly)?
Thanks

 

[Guillaume Depestele]

Anyone got an idea for a cheap cage (top & bottom plate mainly)?

I have this one : http://www.viewfactor.net/fmj-top-plate-lite.html

For the price it's very good!

I don't have the bottom one : http://www.viewfactor.net/products/epic-scarlet-acc/fmj-bottom.html

 

[PC Greene]

http://www.reduser.net/forum/showthread.php?120563-VIEW-FACTOR-PLATES-CAGE-RIBS

Anyone got an idea for a cheap cage (top & bottom plate mainly)?
Thanks

 

[Neil Dearman]

great way to pack your bulbs for your lights Especially traveling!!!!

 

[vagabond Beaumont]

For those guerrilla run and gun shoots i use LowePro Lens Cases mark them with Camera Tape and put them on a belt...

LowePro Lens Cases are about $12 - $15...

i use a heavy web utility belt that quickly snaps on and off...

http://www.bhphotovideo.com/c/product/752412-REG/Lowepro_LP36303_0AM_Lens_Case_9_x.html

http://www.bhphotovideo.com/c/product/752411-REG/Lowepro_LP36302_0AM_Lens_Case_9_x.html

Gets rid of having to carry a lens case and makes switching lenses easy...

A few photos below show the lens belt in action...

 

[Joe Pontecorvo]

These plastic Ammo Boxes from Harbor Freight are really handy for tools, filters, and all kinds of bits. Sometimes you can pick them up for free with a coupon.
http://www.harborfreight.com/ammo-box-61451.html

 

[Shapour Daneshmand]

Great thread.
thank you to all the contributors.

 

[regis larue]

My fav thread. I've gotten some great tools thanks to this thread.

 

[Jim Hoffman]

I like these for carrying speed rail or rolls of gel and diffusion. They come on a couple different sizes. Great for carrying a few things that are awkward to pack for a small set up and give nice protection.

They are fishing rod tubes for travel. There are a few different sizes. Available through stores like bass pro shops or cabellas or amazon.
$50-150 ish

http://www.planomolding.com/product.php?BCCID=113&PID=757


Product Features:

Dramatic styling and superior thick-wall design of the 6508 Jumbo Airliner provide maximum protection. The two-piece design extends to a whopping 112" to handle the longest rods. Wheels and lockability make traveling with the Jumbo Airliner a snap.

Larger diameter for more storage
Extends to 112"
Integrated wheels for easy transport
67-112" x 11.5" x 8.5"

 

[Thomas Akira Nakasone]

Manfrotto Quickplates

Manfrotto Quickplates

I have a few of these for shooting lightweight - great when working with locked off shots with different brand tripods and only one camera. I also use them for switching between monopod/tripod/movi/handheld rig.

http://www.bhphotovideo.com/bnh/con...KWHhP2f-sECFSMA7Aod2GAANg&Q=&is=REG&A=details

 

[Sean Solowiej]

3D Printed Lens Gears

3D Printed Lens Gears

OK here's one. Custom lens gears for any lens for around $12 each.

Step one: Go to Tinkercad.com and design a gear with a free account using their online software.
Step two: Have the design printed by Shapeways.com and wait for it in the mail.


I've made a bunch for my Cooke Speed Panchros - the gearing fits perfectly with my FF, or makes hand-pulling much easier with those tiny barrels. Also made a bunch for my Contax set. You can design the outer diameter to be as big or small as you'd like - to save space, match industry standard, or fine-tune your FF gear speed.

These were printed in their "strong, flexible nylon" - no concerns about strength/durability, and just enough flex that with careful measuring mine hold on tight without slipping or squeezing too tightly. You could also tap them for set screws if so inclined.

 

[Ben Scott]

Amazing Sean. Is there any way of sharing templates so a database could be built up?

 

[Guillaume Depestele]

and just enough flex that with careful measuring mine hold on tight without slipping or squeezing too tightly.

So cheap! I was thinking of a $60 value. Amazing, thanks for sharing!

Once we get the diameter of the ring, you just put the same value (Inside diameter) on the CAD file ? Or something like 0.1mm less ? Thanks!

Amazing Sean. Is there any way of sharing templates so a database could be built up?

I second that. At least the diameter of lenses.

 

[Suresh Kara]

http://www.bhphotovideo.com/c/produ...earch_my10_adjustable_field_monitor_yoke.html

So handy

 

[David E. Rogers]

Not exactly a cool gadget, but an active firefighter making some nice storage bags, and notebook covers from recycled fire hose. http://recycledfirefighter.com/

I just order some and will let you know.

David

 

[Curt Pair]

ARRI Basecamp Production Bag! 22L / 50L

Do you know how makes these? Bright Tangerine! They make them FOR Arri! Ha! Take a look inside... there's a small tag on the inside!

 

[Curt Pair]

Humm... Seems like we can use same ties with Corrugated Plastic Cardboard to make our DIY TrekPak dividers

Yup! It's pretty easy! I made my own! I bought some... didn't like the 'length' of what they provided... so I made my own from corrugated plastic cardboard and 1/8" foam... Takes me about an hour per case! Pretty easy to do too!

 

[Ben Scott]

Great DIY work Curt

 

[Mike P.]

Yup! It's pretty easy! I made my own! I bought some... didn't like the 'length' of what they provided... so I made my own from corrugated plastic cardboard and 1/8" foam... Takes me about an hour per case! Pretty easy to do too!

Looking good Curt!

Did you buy the corrugated plastic and 1/8th foam anywhere specific (a nationwide chain, hopefully)? And I'm presuming you just used the actual TrekPak clips, right?