GROUP BUY - Kessler Shuttle Dolly

[Marinus Brückmann]

Bump

 

[Gabbo Marvasi]

If you have some doubts about how cool is this product and how many things you can do with it, imagine it with a Cartoni Jibo on top of it....

just as in this picture

and in the veryfirst test video
https://www.facebook.com/gabriele.marvasi/videos/1261582267205438/

 

[Jean baptiste]

hi
what kind of tube you will use with it and what kind of stand?
we have stiff and light carbon tube with lenght around 2m and diameter 29mm, it will works ?
thanks

 

[Scott Balkum]

Let's bring this one home to 25% - Only hours left.

 

[Chris McKechnie]

hi
what kind of tube you will use with it and what kind of stand?
we have stiff and light carbon tube with lenght around 2m and diameter 29mm, it will works ?
thanks

It will fit rail 1 1/4" to 1 1/2"

 

[Ivan Verlaan]

Thanks for putting together your 300th group buy of the year, Chris

I'm in, if we can hit 25%! Hope to pickup some accessories too - what's the status of their expandable track?

<edit: removed some stuff about accessories because I misread the original post>

Thanks!

 

[Brian Wikerson]

Please add me to the list for one.

Thanks!

 

[Scott Balkum]

We only need 3 more to get to 25% - only a few hours left on this one. Grab it while you can.

 

[Chris Beller]

It will fit rail 1 1/4" to 1 1/2"

Just want to jump in an make a clarification. The brake accessory will only support rail 1-1/4" to 1-1/2", but the system with the keeper/grabbers will support 1-1/4" to 2". The Shuttle Dolly without the Keeper/Grabbers, could technically run on rail up to 2-1/2" diameter.

 

[Gabbo Marvasi]

Jean,

In order to have It with an heavy setup we use a costum made very sturdy 3m rail, as in the picture (you can have a better clue watching the video). For "normal" use I use 1 1/2 aluminum pipes. U need an additional support every 1.5meters. I personally don't have a very good experience with carbon fiber tubes, for this kind of job, the reason are:
1) carbon fiber can be damaged with impacts and so on, so if u are not be very careful on how you handle it and transport it you can have bad surprises since:
2) a structurally damaged carbon fiber (note that the damage is sometimes not very visible) can loose quickly its sturdiness and can brake easier:
3) when carbon fiber brakes it does it without any warning, it just crashes dramatically....

That's why I would go with Aluminium if I were u

 

[Jean baptiste]

It will fit rail 1 1/4" to 1 1/2"

sorry but I am french, I don't understand this measure, I will try to convert it but I am not sure I can do it
what about stand ?
thanks

 

[Scott Balkum]

sorry but I am french, I don't understand this measure, I will try to convert it but I am not sure I can do it
what about stand ?
thanks

Just want to jump in an make a clarification. The brake accessory will only support rail 31.75mm to 38.0mm, but the system with the keeper/grabbers will support 31.75mm to 50.0mm. The Shuttle Dolly without the Keeper/Grabbers, could technically run on rail up to 63.5mm diameter.

I adjusted Chris Beller's comment above to mm. It includes to adapters to mount on a jr. pin or c-stand.

 

[Chris McKechnie]

Thanks for putting together your 300th group buy of the year, Chris

I'm in, if we can hit 25%! Hope to pickup some accessories too - what's the status of their expandable track?

<edit: removed some stuff about accessories because I misread the original post>

Thanks!

Haha...no problem! Gotcha down!

Please add me to the list for one.

Thanks!

Added!

Just want to jump in an make a clarification. The brake accessory will only support rail 1-1/4" to 1-1/2", but the system with the keeper/grabbers will support 1-1/4" to 2". The Shuttle Dolly without the Keeper/Grabbers, could technically run on rail up to 2-1/2" diameter.

Thanks for that clarification Chris B

 

[Terry VerHaar]

I'll admit - I promised myself I was holding off on new purchase... but, just out of curiosity, do we have to configure and place our order by 9 PM tonight or just declare our intent and put our package together after that?

 

[Chris McKechnie]

I'll admit - I promised myself I was holding off on new purchase... but, just out of curiosity, do we have to configure and place our order by 9 PM tonight or just declare our intent and put our package together after that?

You have to order within 1-week...you just need to chime in if you want to get in on the savings by tonight 9pm PST.

Only 1-more needed for top tier!

 

[Note Suwanchote]

You have to order within 1-week...you just need to chime in if you want to get in on the savings by tonight 9pm PST.

Only 1-more needed for top tier!

let's do it!!!

 

[Sean Montgomery]

Top tier unlocked then.

I'm in for one.

 

[Scott Balkum]

Top tier unlocked then.

I'm in for one.

AWESOME! 25%

 

[Derek Dienner]

I'm in for one if it's not too late!

 

[Chris McKechnie]

TOP TIER LEVEL HIT - 25% off!!

TOP TIER LEVEL HIT - 25% off!!

Kessler is creating a custom landing page for us, which will go live on Monday (their web guys are out until then). They will issue a discount code for the accessories as well, which will be PM'd on Monday, along with the special ordering page/link.

Good job guys!