Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

DSMC EPIC / SCARLET Release build 5.1.48 and Beta 5.2.11

Jarred Land

Jarred Land

Fire Chief
Staff member
Joined
Dec 27, 2006
Messages
10,644
Reaction score
33
Points
10
Enjoy :)

Release v5.1.48
EPIC DRAGON - https://www.red.com/downloads/52b4914517ef02624c000017
EPIC - https://www.red.com/downloads/4f56854e6261f95a5700069b
SCARLET - https://www.red.com/downloads/4f56854e6261f95a570006ca


[h=4]SIGNIFICANT CHANGES SINCE PREVIOUS BUILD V5.1.47[/h]
  • Dragon stability update
  • Added Scarlet Dragon 5K 2:1, 2.4:1 and 16:9 formats
  • Added REDmote firmare v8.0.13
  • Fix video glitch during magnify toggle
  • Fix calibration failure on Dragon
  • Fix button handling for the new 7INCH LCD
  • Fix RGB gains for Dragon
  • Fix Scarlet Dragon 5K and lower resolution formats
  • Fix AF calibration for Nikon 17-35mm lens

Beta v5.2.11
EPIC DRAGON - https://www.red.com/downloads/5231f48d17ef026cdf0002e4
EPIC - https://www.red.com/downloads/50d4b905a48c372a96001721
SCARLET - https://www.red.com/downloads/4f8c3e5f2f74a94ac2000419


[h=4]SIGNIFICANT CHANGES SINCE PREVIOUS BUILD V5.2.9[/h]
  • Dragon stability update
  • Updated FLUT for Dragon Monochrome
  • Added Scarlet Dragon 5K 2:1, 2.4:1 and 16:9 formats
  • Added combined AF/AE key action
  • Added REDmote image v9.0.4
  • Added manual SSID connect mode for hidden Access Points
  • Fix AF calibration for Nikon 17-35mm lens
  • Fix names in Module menu
  • Fix button handling for the 7 inch LCD
  • Fix inoperable touchscreen with +1 module
  • Fix next/prev marker indicator on a clip with no markers
  • Fix RGB gains for Dragon
  • Fix empty lists in AE when lens initializing
  • Fix Scarlet Dragon 5K and lower resolution formats
  • Fix Motor Control drop-down menu not updating when attaching Wifi Module
  • Fix media open failure in player
  • Fix video glitch during magnify toggle
  • Fix calibration failure on Dragon
  • Fix camera errors w/short burst captures
  • Fix camera ISO setting with “Default Looks Settings” preset
  • Fix AF label to show AF/AE and status
  • Fix excessive time saving log
  • Removed 1/4 stop option for Nikon
  • Updated Switchblade firmware
  • Enhanced Manual Access Point Mode UI
  • Enhanced WiFi UI dialog

REDmote 8.0.13 - https://www.red.com/downloads/4fd907a426465a310b00015c
 
New 7inch LCD?!? Can't wait to hear more about that!

And thanks for fixing the magnify video glitch. That one was always tough for new producers to understand.

Thanks Jarred!
 
Heh. That word new is always the culprit. Thanks for the new build. I'll update these evening.
 
Are the lower resolution sizes and framerates back for Anamorphic support in this build?
 
Nice getting closer to a realese version with REDgamma4 as default gamma.
 
Normally I black shade when my temp reaches 64 degrees. (adaptive -> target 65) After installing 5.2.11, my temp does not appear go above 62, even when I set target to 70 and let it run for 30 minutes.

Another thing I noticed is that my top fans never stop blowing hair. I thought once upon a time they were off more than on. I can hear them in my fairly quiet room. Also not hearing any audible difference between adaptive and adaptive quiet when recording.

Here is the log file: www.spearsandmunsil.com/sspears70/red/04-25-14/log.zip

[Update: After running a long time my temp has finally settled at 64. Still curious if the top fans should ever turn off. Last I remember them being off was on EPIC-MX. Had not paid much attention on Dragon until now.]

I do have one question. Is it okay to leave the side handle and Redvolt XL module on during upgrade? At one point the instructions always said to remove everything. Now they no longer mention that. I was also concerned for a moment by the blinking green pwr and rec lights after update. I thought something was wrong until I went back and read the install docs. :)
 
Last edited:
Stacey Spears said:
Normally I black shade when my temp reaches 64 degrees. (adaptive -> target 65) After installing 5.2.11, my temp does not appear go above 62, even when I set target to 70 and let it run for 30 minutes. I tried going back to 5.1.48 and I get the same results. I tried to go back to 5.2.9, but it would not let me.
Click to expand...

I put 5.2.9 on my Dragon today and BlackShaded at 64f, I timed the Calibration and it took 4m30sec. I think that's a new record and seems vastly improved in both calibration and speed. Kudos!
 
Hi Jared,

Thanks, Now blackshade is working. Thanks to Alan @ RED Irvine, for proofing that out as well, with this build.

I tried to get Time code 23.98, into tmy Dragon Carbon, via Zaxcom's ERX, but still fails. Any progress on that issue at all?

Thank you very much

Fury
 
Nick Fury said:
Hi Jared,

Thanks, Now blackshade is working. Thanks to Alan @ RED Irvine, for proofing that out as well, with this build.

I tried to get Time code 23.98, into tmy Dragon Carbon, via Zaxcom's ERX, but still fails. Any progress on that issue at all?

Thank you very much

Fury
Click to expand...

Nick, what is the timecode output level on the ERX? I started low and increased the level until the cam caught it. They played very well together.
 
The funny thing now is that with every new update I expect 5K 24fps to be released for the Scarlet-X :)
One can hope.
 
Good update.

No fix for red & purple Exposure display mode inaccurately reflecting RAW clipping/noisefloor values unless also in RAW mode?
[Edit: Just seen 5.1.47 has maybe addressed this "Fix exposure check clip and noise indicators"? Will install & check! :smile: ]

Also would like the green exposure band in Exposure display mode to be a selectable option.
 
You must log in or register to reply here.
Back
Top