Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

The Gentleman's Underwater Bubble Blower Thread

Hi Matt, Gates has a great solution for that: Knob Extenders.
I made my own but it's best for you to contact John Ellerbrock at Gates. Great guy!!!
Here some shots:
https://www.pinterest.com/pin/270216046379566029/
https://www.pinterest.com/pin/270216046379566024/
https://www.pinterest.com/pin/270216046379566021/
https://www.pinterest.com/pin/270216046379566020/

Gates's Extension Knobs really feel good at hand and offer a great grip/precision, even with thick gloves.

Gates reached shortly after I posted, but I'm also going the DIY route. Only I'm going to try a couple of my own ideas over the summer, when gloves arn't really needed. Thinking something similar to the wheel on a lathe with the little handle on it.
 
If you need any dimensional details on the knob, Matt, or other info to help, LMK.

Gates reached shortly after I posted, but I'm also going the DIY route. Only I'm going to try a couple of my own ideas over the summer, when gloves arn't really needed. Thinking something similar to the wheel on a lathe with the little handle on it.
 
Preaching to the choir I am sure BUT....Gates STO Fiji is on again for next year.

Myself, Sean Ruggeri, Becky Kagan Schott and Jessica Mitchell are hosting an intensive week of all things Red/Gates/Resolve, while diving the beautiful reefs and the sharks of Beqa Lagoon Fiji.

If you have been lurking around these forums and want to gain valuable in water experience shooting Reds in Gates housings, learn how to maintain Gates housings and spend afternoons learning how to get the best colours from your underwater shots, using Davinci Resolve, then head to the link for details - http://duai.com.au/sto-fiji-2020/

Hope to see some of you there.
 
SOLD



---------------

Hello all,
Selling a Nauticam W-LT housing with or without monitor (also posted at the 3rd party gear forum):

Nauticam W-LT housing for RED DSMC2 cameras (Epic-W, Gemini, Helium, Monstro) for sale. One year old, the kit shows minimal wear - almost like new. Dome and extension rings are not included, but can be sold as part of the kit. Comes with either extended battery back or monitor back (buyer's choice). Also selling housing for RED Touch 4,7" monitor and some gear rings for Canon optics.
Price new is €10,500 excl. VAT for basic kit, serious offers welcome. Price range €7,500 - 10.000 depending on items bought together. Note: Sold without VAT since exporting from outside EU (Norway).

PM me for a spreadsheet breakdown of items for sale and suggested price.
Pictures here: https://www.jottacloud.com/s/007de6facc60a864ff8a5ca25f15060cc1a
 
hi amund..interested in your kit..can you send me list and asking prices,,iam from canada tks...kozmikunderwater@GMAIL.COM.. I HAVE BEEN LOOKING A LONG TIME FOR A USED NAUTICAM LT HOUSINGH
 
Hi
Anyone using the ARRI Alura 15.5-45mm f/T2.8 Wide-Angle Zoom with LDS or similar underwater? Looking for feedback on practical and coverage
with Dragon 6k - 8K sensor as well as all other visual quality of this glass.
Thanks to all!
Mauricio
Email privately if you prefer - dp@aquaterrafilms.com
 
Hi Mauricio,

I can't say this is true of the 15.5-45, but other Fujinon lenses we've tested have an interesting behavior. That is, while they focus behind an 8 or 10" dome, the minimum focus distance underwater is several feet away. We do have one field report from Asia that says this lens works well with a 10" dome port. Bottom line: if you go this way, test it first.

Alternatives: We publish a list of recommended lenses. Page two shows several PL mount cinema zooms. All are great, and suggest a 10" dome be used with them. https://www.gateshousings.com/wp-co...ecommended-Lenses-for-Flat-and-Dome-Ports.pdf

See you at Jackson.

J-
 
Hi,

Has anyone used the Sigma 12-24mm F4 Art in their housing ? How was it ?

Thanks.

Geoff.
 
Hekko John.
Thank you for your reply and link. I am just looking for that extra reach with the best possible image ...
See you at Jackson for suer.

best
Mauricio -
 
Has anyone tried the new ultra bright 7" for underwater housing, especially the Nauticam house. We are planning to upgrade to the ultra bright but of course need it to work the underwater house. I know it is a bit thicker so may not fit the old housing.

Best,
Andreas
 
I am looking to but a new or used DSMC 1 H2O Filter - Does anyone have one available?
Please send me message or PM me directly 207-504-0733
Thx! Mauricio-
 
I am looking to but a new or used DSMC 1 H2O Filter

I had forgotten about it but actually I do; one H2O & one Low Light DSMC OLPF.
I have other DSMC accessories too like side handles, RED MAGS, MAG readers, BOMB EVF, Tactical gear... I should make a complete list :

PS: it's amazing how much smaller the DSMC OLPFs are, especially compared to MONSTRO!
 
Last edited:
Looks like I have more DSMC stuff than I guessed:

1 x Nauticam NA-DSMC (ROSSA)
1 x Nauticam Custom Back for Shogun monitor in NA-DSMC
1 x Nauticam Tactical Rail Set for NA-DSMC
1 x Nauticam Top Handle for NA-DSMC
1 x Nauticam Spare “BLOCK” for NA-DSMC
1 x RED DSMC OLPF H2O
1 x RED DSMC OLPF Low Light
2 x RED DSMC Side Handle in Pelicase
1 x RED DSMC MAG 128GB
2 x RED DSMC MAG 512GB
1 x RED DSMC MAG Pelicase (4 MAGs)
1 x Wooden Camera SSD Guard
1 x RED DSMC MINI-MAG SIDE MODULE
1 x REDSTATION 1.8
1 x REDSTATION 2.5
1 x REDSTATION 1.8 (Mini)
1 x REDVOLT Travel Charger
1 x REDVOLT QUAD Charger
1 x RED BOMB EVF
1 x RED DSMC ADAPTOR +1 MODULE
1 x RED DSMC REDLINK + Pelicase
2 x RED DSMC Side SSD Cover Plates
1 x RED DSMC Side Handle Cover Plate
1 x RED DSMC V-Mount Cover Plate
1 x RED ROCKET (with Sonnet TB enclosure)
1 x RED ROCKET-X (with Sonnet TB2 enclosure)
 
Selling my Nauticam DCES housing for RED Epic/Scarlet/Dragon DSMC1 cameras. It includes the housing, vacuum leak alert system from backscatter, a brand new vacuum valve, the 8.5 inch Nauticam acryllic port in great condition (no scuffs or scratches on the dome!) with original neoprene protective cover , Nauticam N120 Extension Ring 20 with lock, M20 balls for mounting lights, and including the tokina 10-17mm EF mount lens with the nauticam focus and zoom gears to go with it. Assuming you have the camera, this is the entire kit to get you shooting! Asking $4700 or best offer. Buyer pays shipping and any fees. Willing to negotiate as I'd like to sell this soon.
Pics:
https://drive.google.com/open?id=1Wm...WzbFOY9XatEG3O
 
SOLD


FOR SALE:
Nauticam underwater housing for DSMC2 PL mount optics - mint condition

Rare Nauticam underwater housing for RED DSMC2 cameras, with full FIZ gearing for manual or remote control operation. Works with most PL mount prime lenses and compact zooms with 0.8 gearing in a standard manual control configuration, or with Arri CForce Mini servos via surface cable, or used with DSLR lenses also remote via FoolControl over Gig-E cable. This housing pretty much covers any RED DSMC2 setup, and is amazingly well balanced and stable in the water.

This housing is a fairly rare item, only a handful have been made by Nauticam and is not listed on their website or elsewhere. No idea why, it's an excellent piece of equipment!

This housing has been used very little so it is like new (bought in September 2019). The flat port and N120 adapter have never been used. The RED Touch 4‚7"monitor housing is from Sep. 2018 and has also seen very little use. Reason for selling: Switching to Alexa Mini LF.

Please contact me for pricing info. Monitor housing sold separately, but other items preferably sold together as a complete kit.
(price range when new: $20.000 - 25.000, depending on items)

Also remote control cables available - posting images and more info later.

Images here:
https://www.dropbox.com/sh/fma2g5ob2ctt3lg/AADxmVBH7nFi2Sp2kyZOplKla?dl=0
 
Back
Top