Welcome to our community

Be a part of something great, join today!

Register Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

RED Dual Outrigger Handle

Jarred Land

Jarred Land

Fire Chief
Staff member
Joined
Dec 27, 2006
Messages
10,644
Reaction score
33
Points
10
Introducing the RED Dual Outrigger Handle.

Tool-Free adjustable dual aluminum and rubber handles that also have a great side benefit of folding away to the camera body to make transport compact.

Fits your Scarlet and Epic (M-X and Dragon) with pass through holes to allow for mounting inline with LCD. $490.

In Stock ready to ship.

http://www.red.com/store/products/dual-outrigger-handle

1387563804.jpg


1387578131.jpg


 
Will the right hand handle slip past a regular side handle? Whats the deal with monitor mounting... can I offset to get two bolts in there, or would I be going through the threaded holes?
 
  • Thread starter
  • Admin
  • #6
John Marchant said:
Will the right hand handle slip past a regular side handle? Whats the deal with monitor mounting... can I offset to get two bolts in there, or would I be going through the threaded holes?
Click to expand...

Depends if you want the monitor to be quick to remove or if you plan on leaving the monitor and handles on there together most of the time... You can use dual 1/4-20 longer bolts to go through both the LCD and Handle for more secure mounting, or just use the single bolt to be able to quickly remove the LCD and have the handles stay bolted to the camera.
 
I cant tell...is the top part of the bridge a nato rail? If so, AWESOME, this would integrated super well. Otherwise, please make it so, then it would integrated well with how many people set up the top of their Epic with your main nato grip pointing backwards.
 
  • Thread starter
  • Admin
  • #8
Shawn Nelson said:
I cant tell...is the top part of the bridge a nato rail? If so, AWESOME, this would integrated super well. Otherwise, please make it so, then it would integrated well with how many people set up the top of their Epic with your main nato grip pointing backwards.
Click to expand...

Yes the middle is a Swat Rail. So you can use one of the Swat Rail accessories to mount on top of.. for example you could bolt your LCD to this http://www.red.com/store/products/bolt-on-camera-guide-clampn and have it Quick release on and off. Or have a top handle slide on if you are using an LCD.. etc. etc.
 
Jarred Land said:
Yes the middle is a Swat Rail. So you can use one of the Swat Rail accessories to mount on top of.. for example you could bolt your LCD to this http://www.red.com/store/products/bolt-on-camera-guide-clampn and have it Quick release on and off. Or have a top handle slide on if you are using an LCD.. etc. etc.
Click to expand...

oooh!!! So your sliding top handle will work just fine in the middle? http://www.red.com/store/products/sliding-top-handle

Looking at the side rosettes and clearance, will this work ontop of the WoodenCamera toplate?
 
That is awesome! I was just thinking about needing a setup just like that today. You guys read my mind!
 
Shawn Nelson said:
oooh!!! So your sliding top handle will work just fine in the middle? http://www.red.com/store/products/sliding-top-handle

Looking at the side rosettes and clearance, will this work ontop of the x toplate?
Click to expand...

not sure what an X topplate is but where those rosettes for adjustment are , they are flush on the bottom, i.e if you put that whole assembly on a table without the handles it would lay flat, it doesn't dip down over the sides of the camera like it appears in one of the photos.
 
Jarred Land said:
Depends if you want the monitor to be quick to remove or if you plan on leaving the monitor and handles on there together most of the time... You can use dual 1/4-20 longer bolts to go through both the LCD and Handle for more secure mounting, or just use the single bolt to be able to quickly remove the LCD and have the handles stay bolted to the camera.
Click to expand...

Ok great - cool that its a nato rail too.

How about clearance around a side handle - can I mount it and have this handle swing past a side handle, or is it strictly for setups without?
 
oh come guys, still doing real time replacement of a company name? it's a part i've owned for a million years and had an innocent question about in regards to this cool new red product.
 
John Marchant said:
How about clearance around a side handle - can I mount it and have this handle swing past a side handle, or is it strictly for setups without?
Click to expand...

You can have DSMC SIDE HANDLE attached, yes. So outrigger handle will be to right of side handle, yes, with clearance. Does it swing past, as in like fold all the way back to behind side handle? No.
 
Brent@RED said:
You can have DSMC SIDE HANDLE attached, yes. So outrigger handle will be to right of side handle, yes, with clearance. Does it swing past, as in like fold all the way back to behind side handle? No.
Click to expand...

I'd imagine DSMC side handle and then remove the right handle of this rig for a potentially best-of-both-worlds setup.
 
John Marchant said:
Ok great - cool that its a nato rail too.

How about clearance around a side handle - can I mount it and have this handle swing past a side handle, or is it strictly for setups without?
Click to expand...

Like this?

1387567836.png
 
You must log in or register to reply here.
Back
Top