Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

KOMODO....

James,


This might not be at all possible. And if it was, the art would more than likely have to be monochrome(No Color) and Laser etched/engraved on the body before any internal electronic components were installed. So an expensive custom job.

laser engraving example

engraving-acrylic-005.jpg
 
Last edited:
James,


This might not be at all possible. And if it was, the art would more than likely have to be monochrome(No Color) and Laser etched/engraved on the body before any internal electronic components were installed. So an expensive custom job.

I am going to try and add a design to mine. Something abstract
 
I am going to try and add a design to mine. Something abstract



I would consult with Red about the hazards of doing that before I even considered something that will probably void your warranty and damage your camera. That is if it's something other than maybe adding some type of small sticker away from any heat venting or something.
 
No don't need to email me again, everyone that emailed me the first time I will blast out an email before round 2 so you all get another crack at it.


As for the stormtroopers, its kind of impossible to say. Our factory just started going again last week when California opened the gates again, and yesterday California had its record amount of new infections. We are setting up a backup line in Mexico to build Komodos as well, which a few months ago was a good move but now yesterday, they also had their record amount of new cases and their infection graph looks like it is marching on a steady pace to the moon. So I imagine both Governments will probably make some more changes soon... assuming health is the most important factor , so we don't know if either line in either country will be shut down again, modified, or if they just will keep opening up.

Until then.. we can keep hand making these one offs at a slow but steady pace... even if it's just one at a time. We have the parts to do so... I'm painting and our proper powdercoater is painting and we have enough assembly ninjas to keep going even if we need to go back to 10 people max in the building at any given time.


Awesome. I am glad you are still chugging away. Fingers crossed I can be in that next batch of limited colors. Thank you for pushing through this madness and making something special for us.
 
hold the phone.. i just looked at some older versions you did.. and you nailed it.

If I were a bettin’ man I’d say look at Lana Wachowski’s Komodo for the round two color. Out of the five colors on hers I can recall seeing we can eliminate orange. So I’m thinking we are looking at either purple, that gold/yellow/light orange looking color, that hot highlighter red/pink, or the bright lime green Bayhem variation.

If we cross reference those colors with Rand’s mockups, we have good odds guessing.

I may have seriously overthought this.
 
We're doing colors again? Allow me to shamelessly reshare my mockups from last year. Looking back, I kinda nailed Lana's color scheme, albeit a bit less bright.

While I love the bright color ideas (especially that Kodak yellow one), I would love to see Komodo available in some more muted, more military colors:

Cream:
gUNXqU6.jpg


Desert Tan:
Ht4kG2B.jpg


Gunmetal:
GeQtc5T.jpg


OD Green:
PMGgTip.jpg


And then of course to go with my Ti Hydrogen...
PPKSmW4.jpg


And then this one's just for me:
O0gjYy5.jpg
 
....maybe adding some type of small sticker away from any heat venting or something...

Yeah, whoever has kids, loot your daughter's sticker book and you have your unique Komodo. :devil:
Fairies, Unicorns, Hello Kitties and so on, would make Komodo look like a toy, too, IMO, you won't need a custom colored one anymore.
One could also claim that a fluorescent / luminescent color is absolutely essential for Komodo, in order not to lose this tiny camera in the (apparent) muddle of a film set.
Aahh...this color craziness... :crazy:


any recommendations for an EOS-R to Leica-L lens adapter for Komodo?

Heheheh.. a nice try to change the subject.
L-Mount and RF-Mount have the same FFD. In this case you would have to change the lens mount. Honestly, I didn't do a lot of research in this regard, so I don't know if there's a company offering this already, or if it is even possible to do so (mount diameter, electronics, etc.). If you want to use the lens (L/SL or RF) on both systems, it might get costly for sure. In other words, it's not worth it, IMO.
 
Last edited:
Anything in a camo would be super cool for us to build right into the two action films we’re financed to make in the next year (when it’s safe for cast & crew).
 
Anybody know of a release date or when these will show up on B&H for pre-order? Hoping to get my order in ASAP :DD
 
We're doing colors again? Allow me to shamelessly reshare my mockups from last year. Looking back, I kinda nailed Lana's color scheme, albeit a bit less bright.

Probably just wait until black, but I love the gunmetal or the lighter gray. Those are pretty sweet.
 
I will be adding some additional graphical ideas in this space.

paint-2-1-10.jpg


nb-2-1-11.jpg


df-2-1-12.jpg


red-2-1-13.jpg


paint-2-1-14.jpg


sor2-2-1-15.jpg


ang3-2-1-15.jpg


dean2-2-1-16.jpg


mcq-2-1-17.jpg


sw-2-1-17.jpg


ti-2-1-18.jpg


cross-2-1-20.jpg


crosg-2-1-15.jpg


cross-blue-2-1-21.jpg
[/IMG]

knight-2-1-16.jpg


swordm-2-1-17.jpg


lac-2-1-20.jpg


blue-2-1-25.jpg


vam-2-1-23.jpg


gas-2-1-30.jpg


gas-2-2-1-31.jpg


secr-2-1-27.jpg


red-carb-2-1-28.jpg


metal-2-1-35.jpg


fires-2-1-29.jpg


fire-monster-2-1-30.jpg


skull-2-1-17.jpg


skull2-2-1-28.jpg


dk-2-1-18.jpg


ind-2-1-19.jpg


icey-2-2-1-20.jpg


an-1-1-7.jpg


asw-2-1-32.jpg


pol-1-1-8.jpg


solde-1-1-9.jpg


per-2-1-22.jpg


cybe-1-1-10.jpg


ro-2-1-23.jpg


vud-2-1-47.jpg


vam-1-1-11.jpg


smo-1-1-12.jpg


vk-2-1-51.jpg
 
Last edited:
All this is going way too far.
And i thought petrolheads would be the only ones caring about colors & patterns so much :Angel_anim:
 
Back
Top