Mats Hummel
Member
It crashed when open fully and that's easy to do. 
Welcome to our community
Be a part of something great, join today!
DSMC2 Release Build v7.0.2
- Thread starter Jarred Land
- Start date
Dragan Trifunovic
Well-known member
- Joined
- Aug 17, 2012
- Messages
- 134
- Reaction score
- 0
- Points
- 0
- Location
- Belgrade, Serbia
- Website
- www.helivideo.rs
Dear RED, is it really so hard and complicated to publish any new firmware without such terrible bugs?
Mats Hummel
Member
FIle a ticket to RED support will help them a lot!
http://www.red.com/contact-us
http://www.red.com/contact-us
Dragan Trifunovic
Well-known member
- Joined
- Aug 17, 2012
- Messages
- 134
- Reaction score
- 0
- Points
- 0
- Location
- Belgrade, Serbia
- Website
- www.helivideo.rs
It never happened before.
That was first time with 7.03.
Revert to 7.01 and now it works normal.
That was first time with 7.03.
Revert to 7.01 and now it works normal.
Dragan Trifunovic
Well-known member
- Joined
- Aug 17, 2012
- Messages
- 134
- Reaction score
- 0
- Points
- 0
- Location
- Belgrade, Serbia
- Website
- www.helivideo.rs
I just done firmware upgrade again to 7.03 and now LCD is working fine (no problems in playback).
edit:
After some more testing I've found that's happening again but only when LCD top frequency is set to 30Hz (not in 50 and 60Hz).
edit:
After some more testing I've found that's happening again but only when LCD top frequency is set to 30Hz (not in 50 and 60Hz).
Last edited:
Mats Hummel
Member
FIle a ticket to RED support, it will help them a lot!
http://www.red.com/contact-us
http://www.red.com/contact-us
Edy Martinez
Member
Hey Dragan I have installed the FW 7.03 but I can return to the FW 7.01?
Dragan Trifunovic
Well-known member
- Joined
- Aug 17, 2012
- Messages
- 134
- Reaction score
- 0
- Points
- 0
- Location
- Belgrade, Serbia
- Website
- www.helivideo.rs
Yes, you can. Just copy 7.01. firmware to ssd and do same upgrade procedure as for any firmware.
Nils Ruinet
Well-known member
- Joined
- Apr 21, 2007
- Messages
- 1,369
- Reaction score
- 0
- Points
- 36
- Location
- Paris, France
- Website
- vimeo.com
Any news from Red regarding the issues some people mentioned with Sigma EF lenses ?
Is there a 7.04 on the way ?
Is there a 7.04 on the way ?
Scot Yount
Well-known member
I hope so. I have basically put my Sigmas away until this is fixed...
Nicholas Wise
Well-known member
- Joined
- Apr 10, 2014
- Messages
- 472
- Reaction score
- 0
- Points
- 16
soooo, which is the most stable, bug-free firmware post 7.0.0?
Tom Gleeson
Well-known member
- Joined
- Nov 7, 2007
- Messages
- 1,405
- Reaction score
- 7
- Points
- 38
- Location
- Sydney
- Website
- www.cinematography.net
7.03 has sorted out the issues I was having with the Canon CNE lenses and full communication has been restored.
I did a shoot the other day and a second camera was used and I was surprised to see it was an Epic MX running a very old FW5.3. The owner rightly pointed out it worked perfectly well so was not keen on a FW upgrade. Hard to argue and was amazed when we turned it on and it was up and running in 10 seconds as opposed to my latest model Monstro with up to date FW that took over a minute to boot up. My Monstro is running more accessories but boot up time has somehow slipped back 10 years to RED ONE days.
I would add that with the IPP2 workflow really helps with matching the MX footage to the newer sensors
I did a shoot the other day and a second camera was used and I was surprised to see it was an Epic MX running a very old FW5.3. The owner rightly pointed out it worked perfectly well so was not keen on a FW upgrade. Hard to argue and was amazed when we turned it on and it was up and running in 10 seconds as opposed to my latest model Monstro with up to date FW that took over a minute to boot up. My Monstro is running more accessories but boot up time has somehow slipped back 10 years to RED ONE days.
I would add that with the IPP2 workflow really helps with matching the MX footage to the newer sensors
Craig Lees
Well-known member
- Joined
- Aug 28, 2010
- Messages
- 667
- Reaction score
- 0
- Points
- 16
HELP?!?!...
http://www.reduser.net/forum/showthread.php?168764-HELP!-Gemini-5k-Ana-6-5-tearing-issue
Thanks!
Craig Lees
cogartlit@yahoo.co.uk
UK
http://www.reduser.net/forum/showthread.php?168764-HELP!-Gemini-5k-Ana-6-5-tearing-issue
Thanks!
Craig Lees
cogartlit@yahoo.co.uk
UK
Jay Hall
Member
- Joined
- Jul 22, 2017
- Messages
- 17
- Reaction score
- 0
- Points
- 1
- Location
- Auckland
- Website
- www.newwavecollective.co.nz
Just a few notes on Firmware 7.0.4 before you update. (Note: these findings are on a Scarlet-W)
Sigma 24-70 f2.8 OS image stabilisation not supported
Sigma 50-100mm f1.8 get a message saying image stabilisation not supported (but this lens has no image stabilisation) and aperture can go down to f1.7 but this doesn't cause camera crash like seen previously
The side handle is definitely much more responsive and less buggy when using Canon lenses and slightly better when using Sigma lenses. No longer getting an oblique glitch on the screen of my 7inch touch.
Just some food for thought before upgrading.
Sigma 24-70 f2.8 OS image stabilisation not supported
Sigma 50-100mm f1.8 get a message saying image stabilisation not supported (but this lens has no image stabilisation) and aperture can go down to f1.7 but this doesn't cause camera crash like seen previously
The side handle is definitely much more responsive and less buggy when using Canon lenses and slightly better when using Sigma lenses. No longer getting an oblique glitch on the screen of my 7inch touch.
Just some food for thought before upgrading.