Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Using a faster shutter to replace ND.

Asher Vast

Well-known member
Joined
Jan 6, 2014
Messages
120
Reaction score
0
Points
0
I've been shooting a lot of slowmo scenes in daylight lately. I would typically shot 120fps 4K at a 240 shutter but I would still need to use ND to stop down the daylight for proper exposure. Just last week, my ND filter broke on a shoot that was all slowmo of dance scenes outdoors. I used a higher shutter speed to achieve proper exposure and when reviewing the footage and it looks very sharp and quite good IMO. There's hardly any motion blur at all. Has anyone else experimented with this? For the purpose of shooting 120fps and higher, in daylight, is there any reason you would still use ND instead instead of just raising your shutter speed?
 

Attachments

  • IMG_20170511_154353.jpg
    IMG_20170511_154353.jpg
    90.8 KB · Views: 1
Shutter adjustment usually is to change sharpness and motion blur. If you want to maintain the blur level in camera, then you need ND.

If you like the look you get, then keep it up.
 
All those "Step up" movies were filmed extremely high.
 
Shutter angle is a creative choice. If you're ok with the sharper motion, then go for it. Especially at extreme slomo, it's hard to notice the difference to be honest. At 23.98 however, anything other than 180 starts to be more noticeable.
 
I do it all the time. If I get to decide 33 fps slomo and sound stretched to fit and short shutter makes pretty much any film better. :)
 
Shutter angle is a creative choice. If you're ok with the sharper motion, then go for it. Especially at extreme slomo, it's hard to notice the difference to be honest. At 23.98 however, anything other than 180 starts to be more noticeable.

This 100%
 
All the time. At higher frame rates, I tend to shoot higher shutter speeds to get rid of the blur. In slow motion, that blur makes it look slightly out of focus to me.
 
yes if you're at 120 you don't have to do just 240 however if you go TOO high it will begin to get very noticeable and have a very nasty aesthetic. I ran out of ND's once too and shot 60 or 120 slow mo at too high of a shutter (I forget what it was maybe 500-800++) and the slow mo did NOT look good at all it was extremely stuttery and aesthetically very amateurish looking so be careful I wouldn't go too high, make sure to test.
 
I do higher shutter alot and the thing to look out for is subjects or camera that has a panning movement. Things traveling towards you or from you is not so sensitive.
 
I usually have a faster shutter than the normal 180 degrees, since I feel it smears digital images and loose clarity otherwise. Sometimes I go higher if I know I need to do post-stabilizations.
 
Back
Top