Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Tutorials for Newcomers to Premiere Pro

Hi Matija - If you have saved your adjustments to the rmd file in RedCine-X then simply go intro Premiere > Look in the Project Panel > Find Your Desired Clip > Right Click > Source Settings > Click "Reload from RMD"

That will tell Premiere to reload the metadata for that clip from the RMD (which you have updated in RedCine-X)
 
Brad,
Thanks for your generosity and sharing this great information. I've bookmarked this page and will be watching the videos this weekend.

One question, and I apologize in advance if it's outside the scope of these videos... But I've had trouble in the past with the R3D workflow in Premiere CS5, mainly with playback on my mac. On 1/4 and even 1/8 playback quality, I get stutters and freezes playing from the R3D's, with a new Mac that should be plenty capable. Can you recommend any video cards? I currenly have an ATI Radeon HD 5870, but it doesn't support the CUDA playback and I think that's where I'm having troubles. Any recommendations?

Thanks again for the help.
 
Hi Taylor,

I find that playback of Red footage (before any effects are applied) is pretty similar whether I am using CUDA acceleration on the GPU or just using the CPU in software mode instead. This seems to be because debayering of a Red frame is always done on the CPU and not the GPU (unless you have a Red Rocket of course). Being that is the case, I'm wondering if something else could be the issue on your end? What sort of storage system do you have your Red files playing back from? Is it possible that the drives can't keep up?
 
Brad Allen said:
Hey Patrick! Which file are you referring to? The .rmd?
Click to expand...
the "importerRed" and the "importerRedServer" files ... of which there are three copies, and I copied each set to different directories(i think i did it right, atleast premier is working). I btw also had to overwrite files of the same name when i did this(the ones I overwrote had more current update dates ... but which btw where giving me file failures).
 
Erwin van Dijck said:
I'm not technical... but since most computers at least use SATA for the hard drive, and that is potentially 3Gb/s, that should be enough for a Scarlet data stream?
Click to expand...

SATA starts at 1.5Gb's (SATAII is 3Gb/s), but that's only for the interface itself and does not necessarily indicate the drive's performance. Also, if the footage was sorted on a single external drive, the chances are that the driver would be a slower performing.

So even if the interface is capable quite capable for playback, the drive that is using the interface may not be :)
 
PatrickFaith said:
the "importerRed" and the "importerRedServer" files ... of which there are three copies, and I copied each set to different directories(i think i did it right, atleast premier is working). I btw also had to overwrite files of the same name when i did this(the ones I overwrote had more current update dates ... but which btw where giving me file failures).
Click to expand...
Oh right! You're talking about the Epic Importer Plugin! Ha. Gotcha. Yeah, AE, Ppro and AME all need their own copies of the files :)
 
Brad Allen said:
Hi Matija - If you have saved your adjustments to the rmd file in RedCine-X then simply go intro Premiere > Look in the Project Panel > Find Your Desired Clip > Right Click > Source Settings > Click "Reload from RMD"

That will tell Premiere to reload the metadata for that clip from the RMD (which you have updated in RedCine-X)
Click to expand...

thanks for answer, and one more qouestion, maybe it's stupid but i'm new with red, how to save RMD file, because I have r3d file without .rmd file
 
New tutorial posted guys covering some more technical and advanced aspects of working with R3D footage in Premiere. It's been added to the first post :)

As per usual, make sure to let me know if there are any questions or things I have made confusing!
 
Matija Petrovic said:
thanks for answer, and one more qouestion, maybe it's stupid but i'm new with red, how to save RMD file, because I have r3d file without .rmd file
Click to expand...
Hi Matija,

Have a look at the 25 minute mark in the tutorial I just posted. You can either go to the first post of this thread or go straight to youtube by clicking here. In there, I adjust some metadata on an R3D and then save it to an RMD :)
 
Last edited:
Great initiative and very well done Brad !!
This is a very interesting and informative thread, also due to the questions and answers.
Thanks for sharing.
 
Thanks Brad!

It's pretty great watching other peoples tutorials that know exactly what they are doing!

I am very very interested in learning about the color grading aspect of editing. Jumping through applications and what to export your timelines as. Things of that nature!

You're the best man!
 
You must log in or register to reply here.
Back
Top