T/E (Exposure always Yellow)

[Austin Reeves]

Hey guys, configuring my Weapon and regardless of manual or auto calibrations, I haven't been able to get a green status from the Exposure T/E indicator. It always remains Yellow. I've tried the manual calibration it came with, an autocalibration, and now a manual calibration on the sensor at current specs. Config is just 23.98/180deg/8k.

Now since switching over to IPP2, not sure its relavent or not, but switching over to the Legacy pipeline and following the manual instructions, I do see some gridlike noise went cranking the FLUT up high. I switch it back to IPP2, and performed my calibrations. Am I missing anything? Any help from the gurus would be greatly appriciated.

-Austin

 

[Phil Holland]

What temperature are you running at?

 

[Austin Reeves]

Thanks for jumping in Phil. Full warmed, its running about 40/60, running adaptive fans. This is a brand new Helium S35 I just took possesion of last week.

BTW, I have to say thanks, for all you do for the community. Believe me, people like me have found the info/tests to be invaluable.

 

[Chris McKechnie]

Is the camera actually reaching the temp? If it’s not, that’s why you’re experiencing problems. I would delete all your black shades and make new ones once the cam gets up to temp. You can also bump the temp up to 44 degrees..that’s what i and a lot of users run the cam at.

 

[Austin Reeves]

Hey Chris, I did a full restore to factory, started over. Setup the temp for 44C and it seems to have done the trick. Fixed this plus one other odd issue I was seeing. Maybe that first install just needed to be burp'ed like a newborn infant lol.

Thank you both for your help!

 

[Chris McKechnie]

Hey Chris, I did a full restore to factory, started over. Setup the temp for 44C and it seems to have done the trick. Fixed this plus one other odd issue I was seeing. Maybe that first install just needed to be burp'ed like a newborn infant lol.

Thank you both for your help!

Awesome! Happy shooting!