Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Optitek Nikon mount on epic

Joined
Mar 9, 2008
Messages
699
Reaction score
0
Points
0
Location
Los Angeles, CA
Website
www.r3ddata.com
Ive had my Optitek nikon mount for the epic for about a week now, and Im loving every minute of it. The mount is solid, easy to use, and well worth it. Of course the glass Im using goes well with the epic, I think. Ive got the G series lenses, so Im using the nikon mount to manually control the iris.

In film mode, I just use a bartech and give the AC the handset. This gets around the backwards focus of the nikon lenses, and allows for focus range expansion where a large turn on the assistants dial equals a small turn on the lens. This also gets the assistants hand off my camera - which is usually fine but theres always that moment.....

In DSMC mode, its just like a nikon camera with the Epic sidehandle and EVF. I treat it like a big F3. The EVF setup I have forces the camera a little more to the right than Id like. But Im a big guy and can adjust.

Heres a couple of sample pics: 85mm @1.4.
A001_C035_1014X0_001.0000084-resize.jpg



85mm @1.4. In the full res you can see my reflection in his eye.
A001_C036_1014FA_001.0000139-resize.jpg



70-200 @200mm, 2.8. I didnt use HDR, but theres a little more detail in the intentionally blown highlights.
A001_C057_1015SN_001.0000589-resize.jpg



50mm @1.4. Not a great image, but look at the brokah. Also you can see how far I am from the lens while looking through the EVF, as hes looking at me but hes looking way off the lens.
A001_C026_1013HK_001.0000016-resize.jpg



The attached pic is the mount on todays shoot. You can see the M-one mounted. I use the 15mm lightweight and brooks stealth plate with an ET v-dock to the bartech receiver to make the camera as small as possible.
 

Attachments

  • IMG_0576.jpg
    IMG_0576.jpg
    94.7 KB · Views: 0
Any difference, in functionality, between this and what RED plans to offer?
 
RED's Nikon mount will be able to control electronic Nikon lenses as well.

A kind of nuanced correction... Red's mount will offer electronic control of Nikon's electronic lenses. That is to say it will offer autofocus support, electronic control of iris, and VR support if the lens has VR capability. (It should also work fine with the manual lenses.)

Optitek provides iris control of all Nikkor lenses, both the manual and the electronic ones, but no autofocus or VR support. So Optitek provides iris control for the Nikkor "G" lenses, but not autofocus support. (It also has a very solid positive locking mount.)

I hope that's clear.
 
  • Thread starter
  • Banned
  • #9
A tad more info - the Optitek is a dumb mount - meaning all mechanical. There are no electronics in it. It controls the iris on the Nikon G lenses mechanically.

The Red Nikon mount is electronic. It will control the iris via the touchscreen, as well as autofocus and VR.
 
Back
Top