Is there a D- Tap on the Pro i/o module????

[Paul E. McCarthy]

Is there a D- tap on the Pro i/o???

 

[Kevin Marshall]

No. The power output is 4-pin Lemo.

 

[Paul E. McCarthy]

So how do run a wireless ff and a sdi monitor with a d tap to 4 pin XLR cable? Hmmmm so only
1 12v Lemo like on the Red 1, not 2

 

[Greg M]

There are several options, first you can use the dtap on the battery plate like most cameras utilize. You can have a distro box made, or get a dtap distro box from b&H and you can have a lemo cable made to power your FF or monitor.

 

[Paul E. McCarthy]

Thanks, Trying to get away from the Batt plate and make the move to all redvolts especially for steadicam. So they make a lemo to D Tap Breakout. I've never seen that.....been looking all over the internets too.
Now does the +1 Module adapter have a D tap?

 

[Greg M]

No, you would have to have one built for you.
But not sure if the revolts are suitable for powering external devices.

 

[Paul E. McCarthy]

So what the 4pin lemo aux is really only for is a W FF systems ... I guess RED really wants us to buy the 9" touch screen and not use SDI monitors on Camera

 

[Björn Benckert]

Thanks, Trying to get away from the Batt plate and make the move to all redvolts especially for steadicam. So they make a lemo to D Tap Breakout. I've never seen that.....been looking all over the internets too.
Now does the +1 Module adapter have a D tap?

+1
We bought the power out cable with loose ends but I guess a 4pin lemo to D-Tap female cable is what I need. Does any one have a link for such cable?

Or what is the most common Wireless FF power in connector?

 

[Tim Bradley]

I am not sure you will get enough power out the lemo to power wireless FFs ?

 

[Björn Benckert]

I am not sure you will get enough power out the lemo to power wireless FFs ?

So what is the output for? no monitors and no FF....?

 

[Bérenger Brillante]

Sell your module and Get the complete elektra and appollo systeme from action product ! I have the whole system, it's really good and it has nearly the same capabilities as the pro I/o.

I can put a cinetape, a wireless ff, a 7" monitor with wireless transmitter, a hd>sd converter, charge my redmote or my iPhone....
Of course, batteries are running low quickly

Pro I/o I not really a pro I/o.....

 

[Paul Harb]

I just saw these products today for the first time, so great!!

 

[Jacek Zakowicz]

I am not sure you will get enough power out the lemo to power wireless FFs ?

I think that redvolts are at the current threshold for running the camera. Any significant additional load and the battery circuit will trip.
LI-ion have to be circuit protected so they don't overheat and catch on fire.
It would be good for Red to spec the current limit and circuit protection type (slow/fast fuse, resettable, thermal, etc) so we don't damage the camera running over current.