Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

How do you clean you OLPF (or you shouldn't?)

Neil Dearman

Well-known member
Joined
Sep 2, 2012
Messages
1,127
Reaction score
0
Points
0
Location
Atlanta/Nashville
Website
neildearman.com
how do you do it and what you do use? Please let me know thanks!!
 
people use those hand pump blowers to get dust off on set. Not a compressed air can, the hand pump ones..
 
We haven't yet needed to, but if we did need to get dust off the OLPF we would use an Arctic Butterfly, the problem with just blowing the OLPF is that you then charge it slightly with static which means dust can stick to it.
 
Buy a sensor cleaning kit with swabs and cleaning liquid. Then use one swab with a lot of liquid and swab around... then use a another dry swab to "dry up" the cleaning liquid. As I'm told buy the guy that cleaned Finchers cameras for dragon tattoo it's no real major risk so you can be quite ruff. The trick is to make it right so it dries out without any spots from the liquid but still wet enough to leave no hairs from the swab... If you dont get it right the first time no worries just do it again with a new set of swabs and a few new drops of the liquid... (don't poor the liquid onto the sensor but make the first swab rather wet and then stick it in there and swab around...)

Edit: all the the above comes second to all attempts blowing air in there. So the swab thing is only for the stuff that really gets stuck on the sensor...
 
sweet thanks :) where can I get a sensor cleaning kit?
 
Very carefully I'd say - I used swabs and cleaning fluid on my Epic and when it went in for a service Red reported a scratch on the OLPF, so that put me off physically engaging with the surface. I stick with air.
 
If you follow the instructions with the swab kits they work very well. They come in different sizes as well. The brand I have been using is " Photographic Solutions" Sensor swabs.
 
What about a little hand-held vacuum? Is there any reason not to try to just suck the dust out... maybe blow it first to get it off the sensor then suck it out of the sensor chamber from the opening?
 
Back
Top