Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

GROUP BUY - Core SWX EVO Battery Backup Module

Zack Shannon said:
Hey Ivan,

The P-Taps and DC outputs on the EVO are active as long as the internal pack is charged, an onboard battery is mounted, or an AC/DC source is plugged into the DC input on the EVO. Your Teradek will remain powered during a battery hot swap when plugged into the EVO's DC outputs.

Let me know if you have any questions.

Thanks!
Click to expand...

Thanks Zack, please bare with me, I just want to make sure I'm following...

Scenario is: the EVO is charged, no AC adapter is plugged in, I have the Teradek powered from the d-tap port on the EVO plate, and there is a dying v-lock batter on the back-end of the chain.

1) The EVO will continue to provide power to that d-tap port while I swap in a fresh v-lock?

2) The voltage draw spike when the Red (Scarlet-W / Dragon-X) camera boots up won't draw so much power that the d-tap ports temporarily can't power the Teradek?

Thanks for getting into the weeds here ;)
 
Ivan Verlaan said:
Thanks Zack, please bare with me, I just want to make sure I'm following...

Scenario is: the EVO is charged, no AC adapter is plugged in, I have the Teradek powered from the d-tap port on the EVO plate, and there is a dying v-lock batter on the back-end of the chain.

1) The EVO will continue to provide power to that d-tap port while I swap in a fresh v-lock?

2) The voltage draw spike when the Red (Scarlet-W / Dragon-X) camera boots up won't draw so much power that the d-tap ports temporarily can't power the Teradek?

Thanks for getting into the weeds here ;)
Click to expand...

Hey Ivan!
The EVO will continue to power anything plugged into its D-Tap during a hot swap. The EVO can handle 20A discharges, so no worries on overdrawing or losing power during hot swaps.

Thanks!
 
Zack Shannon said:
Hey Ivan!
The EVO will continue to power anything plugged into its D-Tap during a hot swap. The EVO can handle 20A discharges, so no worries on overdrawing or losing power during hot swaps.

Thanks!
Click to expand...

Perfect, thanks Zack!
 
Last edited:
Jumping in!

1x EG
1x HLX-BAB-G
1x FLEET-Q4Ai
 
Is the group discount dependent on the EVO Battery Backup Module? What I mean is I’m interested in buying some Hypercore NEO 9 Mini 3-Stud batteries and wondering if I would have to order the backup module in order to get a discount on the Neo 9 Mini batteries.
 
Is the rear battery plate user-replaceable? For example to change between V-mount and Gold mount?
 
Eric Hales said:
Is the group discount dependent on the EVO Battery Backup Module? What I mean is I’m interested in buying some Hypercore NEO 9 Mini 3-Stud batteries and wondering if I would have to order the backup module in order to get a discount on the Neo 9 Mini batteries.
Click to expand...

Hey Eric,

To qualify for the 20% discount for add-ons, an EVO must be purchased.

Thanks!
 
Kevin Marshall said:
Is the rear battery plate user-replaceable? For example to change between V-mount and Gold mount?
Click to expand...

Hey Kevin,

The battery plate is technically interchangeable; however, the warranty would be void if done outside of our service department.
 
1x EVO-G,
1x EVO-MOD24,
1x Fleet Q4A charger,
1x FX9 GM plate,
1x Cube 200W 14.8v PSU,
1x 6 ft 4-pin XLR cable,
1x FX9 VM Plate,
 
Can anyone suggest a power supply and appropriate cable that I could use to input house power to my gold mount evo with Mod 24?
 
You must log in or register to reply here.
Back
Top