Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Fat32 - REDmag SSD Cards

Michael Pyon

Well-known member
Joined
Nov 3, 2011
Messages
200
Reaction score
0
Points
0
Location
NYC
Hey Guys

I just found out that the REDmag Cards are Fat32. I have no idea what that means and I have a doc to shoot for tomorrow. Can anyone please tell me what exactly this means for me? I've heard that this means you can only do files of 32gb or less. This will be problematic as I have an interview to shoot that might last an hour.

Any info would be appreciative. Thank you.

Mike
 
FAT32 means that no single file can be larger than 4GB. Thumb drives are almost always FAT32 and this causes a lot of problems for people that don't know much about technology.

Red cameras break the clip up into multiple files once the shot goes on long enough. This break occurs after about 2GB. So if you shoot a shot that is 10GB of data, in your RDC (your Red Data Clip) folder there will be 5 .R3D files. RedCine-X and any other program that deals with Red footage will see those multiple pieces, and treat them as one continuous clip.

Two things you should know while shooting: 1) You don't have a choice. FAT32 is the only way to format the drives. 2) It doesn't matter, since the only downside (no file can be larger than 4GB) is circumvented since the Red cameras will break the file up into multiple pieces far before the file size reaches that.
 
Thank you very much guys, I can finally sleep and wake up at 3 in the morning to shoot.
 
Heat and fan noise is going to be more of a problem during that interview. Be ready to give the camera a break every 5 minutes or so. Good luck with your shoot.
 
Heat and fan noise is going to be more of a problem during that interview. Be ready to give the camera a break every 5 minutes or so. Good luck with your shoot.

Come on... 5 min? Set your fan to 35% during recording and you'll be fine. I've run 25 min interviews before without overheating.
 
Back
Top