Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

DSMC build 6.2.44 + REDCINE- X Build 39

Jarred Land

Jarred Land

Fire Chief
Staff member
Joined
Dec 27, 2006
Messages
10,644
Reaction score
33
Points
10
Double update for RCX and DSMC today, Enjoy :


SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.25
* Added WEAPON MAGNESIUM support
* Added SCARLET-W support
* Added REDMOTE v9.5.33
* Added Horizon to the 'Display' preset group
* Fix 0% power level with V-Mount and Gold Mount Battery modules (WEAPON only)
* Fix QT file crashing Resolve/Premier (WEAPON only)
* Fix elevated audio levels with Base Expander (WEAPON only)
* Fix boot hang with active Genlock and Auto Cal (WEAPON only)
* Fix video stutter during Weapon playback (WEAPON only)
* Fix Enhanced A/F notification (Weapon only)
* Fix HDRx state in network storage mode (EPIC DRAGON/WEAPON only
* Fix incorrect Ramp mode frame rate on startup
* Fix Preset Create/Clone not functioning
* Fix Switchblade/Sidekick operating mode during calibration
* Fix blank HDRx setting on startup when enabled
* Fix stale calibration info displayed in UI
* Fix calibration error with active Genlock
* Fix HD-SDI video disruption during start/stop record
* Fix potential camera freeze using keyboard
* Fix intermittent sync failure on startup
* Fix sync loss when record is active
* Fix incomplete UI dropdown lists after defaults restore
* Fix 2K FF audio sync
* Fix AF zone shifted to the right
* Changed UI behavior for ACES
* Improved Calibration Map Import notifications
* Improved Motion Mount colorimetry



REDCINE-X Professional Build 39 Release

Note: RED ROCKET support requires driver 2.1.23.0 and firmware 1.1.18.0 or higher.
Note: RED ROCKET-X support requires driver 2.1.31.0 and firmware 1.4.1.16 or higher.
Added: Dragon 8K support.
Added: HDR Gamma Curves: HDR-2084, BT1886, Log3G12.
Added: Frame Rate Override from Bin.
Added: Frame Rate Override via R3D Trim.
Added: OLPF Override via R3D Trim for clips recorded on DSMC swappable OLPF cameras.
Added: Pixel Masking to map out pixels in post (not supported on Rocket).
Added: Tether support for Frame Trigger mode.
Added: Tether support for limiting the number of frames in a clip.
Updated: CUDA performance improvements.
Fixed: CUDA/CPU exports with 90 degree rotation produced incorrect output.
Fixed: Incorrect H2O OLPF metadata name.
Fixed: REDline works again under Mac OS X 10.11.
Fixed: ProRes issues when viewed in QuickTime Player and Adobe Premiere on Windows.
Fixed: ProRes audio playback with VLC.
Fixed: Issues with some 2K modes on Blackmagic SDI output devices.


WEAPON CF: https://www.red.com/downloads/55a01322f01b305ec100179a (download name will change after go live)
WEAPON MG: https://www.red.com/downloads/56af8a8ccc11fa5a1b0020a4
EPIC DRAGON: https://www.red.com/downloads/52b4914517ef02624c000017
SCARLET DRAGON: https://www.red.com/downloads/538b61b52f74a95b28001816
EPIC M-X: https://www.red.com/downloads/4f56854e6261f95a5700069b
SCARLET M-X: https://www.red.com/downloads/4f56854e6261f95a570006ca
REDMOTE: https://www.red.com/downloads/4fd907a426465a310b00015c

REDCINE-X PRO: https://www.red.com/downloads/5340c33e26465a4b46002ddc
 
Element Technica V-Mount Plate still shows 0% and shuts down camera after 25 seconds :(
 
* Fix HD-SDI video disruption during start/stop record


Can someone please explain what this issue above was/is ?

Thanking you
 
Motion Mount colorimetry!!

Right i try Today, hoping that the color does not become blue again in standard Olpf ;)
QT DaVinci Crash, wow this is important...
And QT Prores blue Luminosity ?

Thanks for this Update guayyssss;)
 
Updated: CUDA performance improvements

- What should we expect regarding performance?

Thanks
 
For me this is a big one!!
So I was once recording a dual stream from a red camera, one over HDSDI and another using the mags. The idea was to do a relay recording. However, every time I hit the start/stop button, there would be a 10 frame or more skip in the HDSDI stream. So my guess is that this will fix that.

Now only to make the tether function more reliable... I had so much problems with it in NYC a month ago.

Adrian Weinbrecht said:
* Fix HD-SDI video disruption during start/stop record


Can someone please explain what this issue above was/is ?

Thanking you
Click to expand...
 
Robert Andriessen said:
For me this is a big one!!
So I was once recording a dual stream from a red camera, one over HDSDI and another using the mags. The idea was to do a relay recording. However, every time I hit the start/stop button, there would be a 10 frame or more skip in the HDSDI stream. So my guess is that this will fix that.
Click to expand...

Would this mean that I'd be able to record on to a pro res recorder (shogun or odyssey 7) have the timecode match the R3Ds? I haven't done it before, but I read numerous reports that there was always a timecode mismatch on previous builds.
 
Robert Andriessen said:
For me this is a big one!!
So I was once recording a dual stream from a red camera, one over HDSDI and another using the mags. The idea was to do a relay recording. However, every time I hit the start/stop button, there would be a 10 frame or more skip in the HDSDI stream. So my guess is that this will fix that.

Now only to make the tether function more reliable... I had so much problems with it in NYC a month ago.
Click to expand...


Thanks Robert

Can you please clarify ? Does this mean you lose 10frames or so at the beginning of hitting record and then get an extra 10 frames at the end? Otherwise the footage and timecode matches up ?

Thank you very much
 
You must log in or register to reply here.
Back
Top