CC 2014 benchmarks so far. Updating as their completed on different systems.

[Eric Bowen]

Z10PE-D8 WS. Would never touch a Supermicro board especially since the warranty clock starts when sold to Disti unless things have changed from last time used.

 

[Eric Bowen]

5960X @ 4.5GHz
64GB DDR4 2400
1TB Crucial M550 SSD
980GTX
AVCHD 4 Layer 30 Minute test
Adobe CC2014
3 Layer - 11:53 (Match Source selected)
3 Layer - 23:56 (HDTV 1080P 23.976)
4 Layer – 13:05 (Match Source selected)
4 Layer - 25:12 (HDTV 1080P 23.976)



[FONT=Calibri, sans-serif]Red 4K to DPX 4096 x 2048 24p Full Range (max bit depth) 30 seconds of media[/FONT]
[FONT=Calibri, sans-serif]3 Layer - 2:05[/FONT]
[FONT=Calibri, sans-serif]4 layer - 2:07[/FONT]



[FONT=Calibri, sans-serif]Red 5K 98 Frame to DPX 5K 24 Frame slow motion Frame Full Range (max bit depth) 30 seconds of media[/FONT]
[FONT=Calibri, sans-serif]1 Layer - 1:56[/FONT]



[FONT=Calibri, sans-serif]Red 5K 98 Frame to DNxHD 1080 23.978 36 OP1A Frame 30 seconds of media[/FONT]
[FONT=Calibri, sans-serif]1 Layer - :18[/FONT]



[FONT=Calibri, sans-serif]Red 5K 98 Frame to DNxHD 440X 1080P 60 frame OP1A Frame 30 seconds of media[/FONT]
[FONT=Calibri, sans-serif]1 Layer - :37[/FONT]



[FONT=Calibri, sans-serif]Red 6K to DPX 6K (max bit depth) 20 seconds of media[/FONT]
[FONT=Calibri, sans-serif]1 Layer - 1:19[/FONT]



[FONT=Calibri, sans-serif]Red 4K to H264 4K 30 seconds of media[/FONT]
[FONT=Calibri, sans-serif]4 layer - :59 (Match Sequence H264)[/FONT]



[FONT=Calibri, sans-serif]DNG 2.4K to H264 2.4K 26 seconds of media[/FONT]
[FONT=Calibri, sans-serif]1 Layer - :13[/FONT]



[FONT=Calibri, sans-serif]AE CC 2014[/FONT]
[FONT=Calibri, sans-serif]Red 4K to AVI Lossless 4k 30 seconds of media[/FONT]
[FONT=Calibri, sans-serif]1 Layer - 1:57[/FONT]

 

[Gavin Greenwalt]

6K at full resolution playback without dropping frames.

I'm not seeing full resolution playback at 6k without dropped frames on the 5960X with a Titan. I can jussssssst about handle 3k (1/2 resolution) without skipping. Is anyone else actually getting true full debayer 6k at 24fps? Are you sure you weren't just playing back from the cache not debayering on the fly?

 

[Eric Bowen]

That was playing back at full resolution preview in Premiere CC 2014. The load started at 100% but didn't stay there and I could not see any dropped frames for a single layer. The transport didnt seem to lag either. I know at 4.5GHz is was clean and the GPU load stayed around 60%.

 

[Jason Osterday]

Gavin how much Ram and what clock speed is your 5960?

 

[Danai Chutinaton]

Thank you for taking the time to post all these results!

Did you overclock the e5 v3 2697 to 3.1ghz? I see intel listing this part as a 2.6ghz.

http://ark.intel.com/products/81059/Intel-Xeon-Processor-E5-2697-v3-35M-Cache-2_60-GHz

 

[Eric Bowen]

Well the E5 V3's are locked but I was able to set the the turbo to 3.1 and get all of the cores to that speed. I believe that is the max turbo for that CPU anyway with all cores active.

 

[DJ Meyer]

Turbo speeds for E5-2697v3

1 core: 3.6
2 core: 3.6
3 core: 3.4
4 core: 3.3
5 core: 3.2
6+ core: 3.1

 

[Gavin Greenwalt]

Gavin how much Ram and what clock speed is your 5960?

Stock clock speed and 32GB.

 

[Eric Bowen]

Stock speed would definitely change the playback results. The CPU clock speed is a large factor with GPU acceleration. However you should be playing back half res without an issue. What is your ram clock speed?