Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Build 16 Build 16 Build 16

Stuart English said:
Soon soon soon...
Click to expand...

Are there many RED ones boys are sending SOS
SOON ONE SOON is better than Soon Only Not Yet ??????


Remebered our old days " Better than SoxY " BTS

Stewart
ex-BTS CHINESE Chief in ASIA
 
Build 16

Build 16

Sorry, I was on the other side if the island. :red_bandana: All sing: " 7 more bugs to go ... We are almost there guys.

To the question of releasing "a stable build xx".. we incorporate lessons learned from previous builds into the next one. Most often the "fix" is a combination of reprogramming the underlying hardware, plus the software that runs on top of that. So if we can fix a bug in a point release we'll do that, but the fastest and cleanest way is usually to fix it in the next release. (This is the reason Build 14 didn't see the light of day)
 
Stuart English said:
So if we can fix a bug in a point release we'll do that, but the fastest and cleanest way is usually to fix it in the next release. (This is the reason Build 14 didn't see the light of day)
Click to expand...

Are you laying the ground work to give us the news that build 16 is a bust but just wait for build 17 because it will fulfill all fanatsy's.
 
Didn't think so Stuart, just fun to get impatient peoples underwear in a knot. Unfortunately you answered to quickly.
 
Build 16

Build 16

Didn't think so Stuart, just fun to get impatient peoples underwear in a knot. Unfortunately you answered too quickly.
Click to expand...

Next time then :biggrin:
 
open gate problem resolved in 16?

open gate problem resolved in 16?

Will the problem with the shutter and the "open gate" function be fixed in build 16?
 
Open Gate

Open Gate

Stuart English said:
Which one is that ?
Click to expand...

The current problem is if the open gate option is selected, and you set the shutter angle to lets say 1/24th, the camera displays that it is set to 1/24th but in reality the camera has set the shutter angle to 1/48th. When you bring the .r3d file into Red Cine and look at the meta data, it is in fact 1/48th, not the 1/24th the camera op selected or what the camera displayed.

So all the material shot is 1 stop under exposed...

This has been discussed with Red already.
 
Open Gate

Open Gate

The current problem is if the open gate option is selected, and you set the shutter angle to lets say 1/24th, the camera displays that it is set to 1/24th but in reality the camera has set the shutter angle to 1/48th. When you bring the .r3d file into Red Cine and look at the meta data, it is in fact 1/48th, not the 1/24th the camera op selected or what the camera displayed.

So all the material shot is 1 stop under exposed...
Click to expand...

O.K. Understood. Maybe yes, maybe no.

The issue is ONLY when you run shutter speeds longer than 1/48 when in 23.98 / 24 fps or 1/50 when in 25 fps etc. This is because of the way Open Gate works (it doubles the sensor frame rate but keeps the capture frame rate the same - so 24 fps becomes 48 fps)

If you are shooting at maximum shutter angle / exposure time turn Open Gate off (which is the default setting anyway)
 
open gate

open gate

Stuart English said:
O.K. Understood. Maybe yes, maybe no.

The issue is ONLY when you run shutter speeds longer than 1/48 when in 23.98 / 24 fps or 1/50 when in 25 fps etc. This is because of the way Open Gate works (it doubles the sensor frame rate but keeps the capture frame rate the same - so 24 fps becomes 48 fps)

If you are shooting at maximum shutter angle / exposure time turn Open Gate off (which is the default setting anyway)
Click to expand...

I would say the ONLY issue is that the camera is reporting one thing while shooting, when in actuality it is doing something different...
 
Open Gate

Open Gate

hubickc said:
I would say the ONLY issue is that the camera is reporting one thing while shooting, when in actuality it is doing something different...
Click to expand...

Agreed, what I'm saying is it only happens if you have a shutter angle between 181 and 360 and you enable OPEN GATE.
 
You must log in or register to reply here.
Back
Top