Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Beta Camera Build 3.2.8

Nikolay Spasov said:
I can't find how to import look (.rmd) file in the camera in this firmware. The camera did not see the .rmd files on SSD. Please Help.
Click to expand...

Place the .rmd file in a folder named "looks" on the SSD. Open the PRESETS dialog and go to the LOOKS tab - the look should appear in the media list on the right hand side of the dialog.
 
If a stable beta comes by the end of the week, like Jarred said, and it has power management, that will make my 12 hour martial arts shoot on Monday much more possible! (meaning I won't have to resort to a 550d when my batteries die)

;-)
 
I have used this build for few days now and really like all the new stuff. One thing I do notice is it seems like Im pushing my buttons on my side handle a couple time to get it to go on to the next function. Maybe Im not waiting enough time, like on the R1's you couldn't just smash buttons you had to wait a little. And the over all camera seems a little slower to response to menu changes. Anyone else on this. Not a biggie as it is all really small stuff. But Im wondering if the build is behaving on my camera the same as others. I know there seems to be a few hiccups now and then but over all some really good improvements.

The 1KWS 400 is Amazing. I do see the noise due to the 1K but when it has enough light on the subject it really looks a lot better than I thought it would. It might even be use as a style look for some projects.
Thank you again Jarred and Jim and everyone at RED.
 
I have problems with 3K HD TOD timecode. Recording is showing corrent TC, but playback and RCX is showing edgecode. TOD TC is gone.
Everything is correct when you switch from for example 4K to 3K HD, but when you turn off and on the camera, timecode is problem.
 
an updated beta build will hit RED.com today that cleans up a few bugs:


* Fix for record error 0x00001E seen on some cameras
* Fix for multi-clip load issue in Playback
* Fix for audio in HDRx mode
* Added HDMI 1080p/720p refresh rates of 24,25,30,50,60
* Enhanced Gyro collection
* Enhanced Playback load notifications
 
Jarred Land said:
an updated beta build will hit RED.com today that cleans up a few bugs:


* Fix for record error 0x00001E seen on some cameras
* Fix for multi-clip load issue in Playback
* Fix for audio in HDRx mode
* Added HDMI 1080p/720p refresh rates of 24,25,30,50,60
* Enhanced Gyro collection
* Enhanced Playback load notifications
Click to expand...


Amazing! I have not had the chance to use the other beta because of error 0x00001E. Can't wait to hit 120fps and thank you!
 
Jarred Land said:
an updated beta build will hit RED.com today that cleans up a few bugs:


* Fix for record error 0x00001E seen on some cameras
* Fix for multi-clip load issue in Playback
* Fix for audio in HDRx mode
* Added HDMI 1080p/720p refresh rates of 24,25,30,50,60
* Enhanced Gyro collection
* Enhanced Playback load notifications
Click to expand...

Will this fix the white start up screen?
Thanks :)
 
Its now live.. go get it.
 
Got the email downloading it now!
 
installed and working great. though didnt have any probs with 3.2.8 and i put 75 hours on that build already. :)
 
anyone know where the "default" has gone from the RedMote?
under connect it used to scan for the camera then come up and give you the option to "rescan" "default" or "cancel"
Selecting "Default" forced it to connect to the camera you where last connected to.

Now I'm unable to control my camera because I can't get the Redmote synced to it and I don't have a TouchLCD or Side Handle.
 
roryhinds said:
anyone know where the "default" has gone from the RedMote?
under connect it used to scan for the camera then come up and give you the option to "rescan" "default" or "cancel"
Selecting "Default" forced it to connect to the camera you where last connected to.

Now I'm unable to control my camera because I can't get the Redmote synced to it and I don't have a TouchLCD or Side Handle.
Click to expand...

DEFAULT was the name of your camera in pre 3.2.x camera builds. In 3.2.x the default camera name is either EPIC or SCARLET. You can always change the name of your camera in SETTINGS->SETUP->COMMUNICATION.

After performing a force_upgrade you will need to re-pair the REDmote with your camera.
 
I do like the new REDmote firmware installer of 3.2.8 and 3.2.13. Much nicer and simpler to use.
 
thats blows as I have Anton Bauer battery backs on my cameras so I now have to unscrew them to be able to put the RedMote on the back of the Epic.
Annoying...
 
roryhinds said:
thats blows as I have Anton Bauer battery backs on my cameras so I now have to unscrew them to be able to put the RedMote on the back of the Epic.
Annoying...
Click to expand...

You can scan for REDmotes to pair wirelessly. The REDMote does not need to be physically attached to the camera to pair.
 
Did they remove the full screen mode in these beta firmware upgrades? I can't find it anymore in the quick keys.
 
Hi Trent

I have tried that but couldn't get it to pair wirelessly so I had to take off the battery back which was a pain but I have the camera paired to the remote now.

Maybe I didn't do it right to pair wirelessly, could you tell me how?
 
You must log in or register to reply here.
Back
Top