Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

1000FPS 4K Red Dragon

1000FPS 4K Red Dragon

  • Hell yes!

    Votes: 267 68.1%
  • No, high FPS is overrated

    Votes: 28 7.1%
  • No, too expensive

    Votes: 97 24.7%

  • Total voters
    392
I don't know why everyone keeps saying it will cover my needs at 500fps or less. We're not meeting your specific needs. If you build a high speed camera to compete it has to be close to or beat the specs of the competition, otherwise people will still buy/rent a Phantom... I agree that 500fps is fine for what I do, but why not push it further? Does 5k cover your needs, 6k, 4k? If RED just wanted to meet your needs we'd still have a 4K sensor.

Hi, of course more would be better. 1000fps, 2000fps.
My only point is to say that myself I mostly need 300-400fps but in high resolution and I'm sure that is a LOT easier to do than 2000fps so it should hopefully be cheaper. I'm still hoping that it would be possible by upgrading the camera instead of buying a new super cam. Now I feel a little "handicapt" that my 200fps are not sharp as they could be and when that is improved technically I will be a happier shooter!
/Andreas
 
hahahhaaaaa.... You crack me up :)

Forget 1000, How about 500FFS burst for 6 seconds... Every-time I shoot 1000fps, I always end up speeding it up to x2 to 500 so I can see the picture move.

Good old Twixtor has saved my arse many times.



IMPORTANT POLL is an understatement.
Phantom cameras drive me nuts, I cringe ever time the producer says we need "SUPER SLOW MOTION" and its not because of the Phantom sensor or image quality, its just that it takes so fucking long to push the files through quickly onset and off set... HATE IT !

Jarred, if you make a 1000 - 2000 fps 4k Camera for 25k, I'll buy two off you as pre-sale.
If you built a SUPER DUPER 6k on steroids DRAGON HIGH SPEED and charged 50k each, I'd buy 4 off you tomorrow.
If you did a 1000 or 500 fps 10sec burst mode update (firmware or hardware) and charged us for it. I'd happily throw money at you.

So glad you guys are thinking about this.
It would make your cameras unbeatable.

Hehehe, Toia, I knew you would be one of the first ones to shout "I'll take 4!" :) Should've left it in my original post :)
 
Hi Jarred,

Let's just say this just arrived in my studio and I am about to buy a Phantom. I need 800/1000 FPS in 2k + . No need for more. Thank you RED for listening.


[url=https://www.flickr.com/photos/90607088@N06/13859664273/]
Sans titre par frederic.ca, sur Flickr[/URL]

; )
 
Ive found that if the shot isn't action packed you double the frame rate and double the image size.
100, 200, 400, 800, 1600, 3200fps…

For general work the faster you go the tighter should be the frame as the viewer can be distracted by off scene stuff, waiting for the action to develop.
The challenge is to maintain a full frame of interesting action that is sharp. So an acceptable depth of field and maintaining focus are paramount.

So a camera that has high sensitivity is a good start.

In the very early days of digital slomo 1994 (!) I was using the NAC memrecam. The first cameras had a RAM buffer that provided just 1.1 seconds of real time recording.
Beginning, middle and end triggers gave enough control to capture pertinent slice of time.


So a camera with a 5 or 10 second buffer with beginning middle and end triggers, would be ok and would be suitable for most pre planned "explosive" events or stunts.

Perhaps shooting wide with a very large format image can be considered as the chaos of explosive action, be it in the field of stunts, nature or sports produces some unexpected action that are best left to be reframed in post:)

In this respect some clever on set reframing software would allow selective processing, reducing number of storage drives needed and reducing length of time the camera is tied up (if non removable media is utilised)

But volatile on board RAM is not an ideal recorder as it ties up the camera in replay and download and if power is disrupted (not uncommon if you are close to the action) you've lost the shot. This should be able to be fixed with a battery backup to the RAM.

One idea would be for a sensor that can do high frame rates as well as a popular frame rates, like 24, 48 and 96. A few Gig of volatile ram would be built in but the camera could have a slot for very bespoke high speed capable, removable media. This media could be rented when required, or the owner operator could buy more if the slo mo took off in their market.


Another would be a specialist yet versatile 12k camera with 24, 48, 96 fps. Then at 200 400 800 fps RAW is stored in RAM and downloaded after the shot.
The shot could be trimmed and reframed if required to reduce download time and file size.
The vast canvas of 12k plays to the concept of repositioning for tight framing.

Of course the days of using volatile ram for such purposes are probable behind us, replaced by an equally exotic and expensive alternative.




Mike Brennan
 
If my dragon could do burst mode for 10 seconds, it would be a whole new camera for me. And I just got the bloody thing!!

I use slow mo a lot, especially in my documentary work. It would be invaluable to be able to do this. And hell, if I had to pay for an upgrade, I would. 3-5K. But first, please try to squeeze out of the dragon what you can. I know it is not easy.

Over buying a new camera, I would MUCH rather a physical upgrade, or perhaps even a reasonably priced module that buffers video for X amount of seconds... that would be killer.

I dont care about 6K in this mode. Give me full 4K at 500-750FPS, and I am yours...

Like I said... a 10 second in camera firmware upgrade is great. a 3-5K USD ram buffer module that does it for longer is even better. As long as the buffer allows for longer record time and perhaps a few seconds PRE-ROLL. This IMHO is essential for this.

Ivan
 
I agree that 1,500 fps would be great, but I'll settle for 1,000 to start with.
I know we are a small minority, but for natural history filmmakers an affordable high speed camera with a Dragon sensor would be... I won't use the word "game changer", but it would be a big freaking deal!
Renting is costly on remote long term wildlife shoot. When it comes to high speed image capture we usually have to plan our entire shoot around certain semi-predictable events, and then hope it remains predictable.
But if we could have that kind of high speed capability built into a camera we carry with us everyday, it would open up whole new possibilities to capture really rare behavior.
 
Can't see RED avoiding this natural extension to their product. Just briefly turn up the volume to 11
 
Yes! Phantom cameras are a pain through and through. It would make an absolute KILLING in the action sports world.

Have you used the 4K Flex? You can actually go out nd shoot with out a Phantom Tech its pretty rad so much easier than previous builds.

Honestly I think $50k is too cheap let's be real a Dragon will cost you $50k.

It'd have to do 1,500fps at 5K to make it compete with the Flex 4K.

A 4K Flex will cost you a quarter of a mil on the low end. The magazines alone cost $50K. Hi-Speed is very hard to make cheap with out cutting corners like Sony.
 
Hi Jarred,


1) Would a High Frame Rate sensor still be suitable for use in a main Camera / B-Camera? - or would this only be a HFR use only?


2) Ideal sensor size = 35mm FF?


3) Able to run on battery power / or mains only?


4) Configurable Wireless syncing of recorded data? (optional umbilical cord / or solid state media)


5) GUI Interface technology - Wireless video? (eg for goggles / Ariels)


6) option of two bodies mating for 3D?


7) I am guessing that a HFR camera would NOT want a fan (to avoid vibration)


- Removing heat from CPU/GPU
http://www.extremetech.com/extreme/...ould-trigger-a-revolution-in-cpu-clock-speeds


- (cubic III-V) Boron Arsenide / As effective as diamond in hear dissipation
http://www.extremetech.com/computin...-revolutionize-computer-chip-heat-dissipation


- Heat sink material / 95% thermal conductivity of diamond
http://semiaccurate.com/2013/08/15/panasonic-make-a-10-micron-thick-carbon-phone-heatsink/


- Tin Selenide (ZT) convert heat back into electricity (and get rid of the heat)
http://www.sciencedaily.com/releases/2014/04/140417124519.htm


AJ
 
Back
Top