what is this? please help

[Daniel Carruthers]

I was shooting with a Scarlet-X and I noticed a weird colour halo around certain objects
the whole image also appears crushed, and over saturated.
At first I thought I hit the video false colour mode, because the colour halo's appeared mainly around bright spots.
What seemed to fix the problem was I changed the lemo cable, as I had a spare. I also noticed the port on the touch screen monitor seemed loose, so I tightened it.
The problem seemed to go away, and never came back.

I guess my questions are, has any one experienced this problem?
Why would the camera record the colour halo onto the SSD if it was just a problem with the lemo?
I've also tested the lemo cable, and I can't seem to find the problem again, seems to work great now, so could this be another issue, maybe with the sensor?

I attached 2 thumbnails, so you can see what I'm talking about

 

[Maik Müller]

Strange stuff, never experienced it. I wouldn't place my bet on the lemo-cable. You might have rebooted the camera when you replaced the cable, maybe you also exchanged the SSD... For now, check connections (REDMAG-module too), factory-reset your camera and re-install the firmware. If the problem occurs again, then save the log and send it to RED's support.

 

[Bob Gundu]

Send RED a log file. You will most likely have to send the camera back.