michael zaletel
Well-known member
FS: Two RED MXs + RPP Full Set w/ Duclos Engraving
Hey guys, I just painstakingly assembled all of the items necessary for this COMPLETE 2-Camera RED-MX package for a project that has been canceled. Everything is in excellent shape, batteries are good, both cameras just came back from RED with a bill of good health (details below).
PACKAGE INCLUDES
HARDWARE
(2) RED MXs with PL Mount
(2) RED Nikon Mount
(4) 12" 19mm Steel Rods
(4) 18" 19mm Steel Rods
(2) 19mm RED Bottom Plate
(4) 19mm RED Top Mount
(2) RED Shoulder Dovetail
(2) RED Cradle w/ Universal Mount
(1) RED Handle - Right
(1) RED Handle - Left
(2) RED Top Handle
(2) Element Technica Short Riser
(2) Element Technica EVF Mounts
(2) Element Technica 15mm Topside Combo
(2) Element Technica 15mm Bridge Plate
(2) Elements Breakout Box
DISPLAYS
(2) RED EVF
(2) Elements EVF Guard
(1) RED LCD - 5"
(1) RED LCD - 7"
(2) RED Arm - 5"
(4) RED LCD/EVF Cable - 24" L-to-L
MEDIA
(20) RED 16GB CF Cards
(2) FW800 CF Card Reader
(2) RED 320GB Drives
(3) RED Drive Cable - 18"
(4) RED Drive AC Adapter
(2) FW800 Cables
POWER
(2) RED One AC Adapter
(4) RED Bricks
(2) RED Brick Chargers
(2) 2B-to-XLR Power Cable (10')
LENSES
Red Pro Primes
- 18mm T1.8
- 25mm T1.8
- 35mm T1.8
- 50mm T1.8
- 85mm T1.8
- 100mm T1.8
New Focus Marks by Duclos
CASES
(2) Anvil Cases for MXs
(1) Anvil Case for RPPS
Both RED MX's were sent this past month to RED for transfer of ownership and evaluation and any issues found were fixed by RED. I have not used either cameras since getting them back from RED so you would be getting them in excellent working condition.
For the first, the repair details on official RED repair report dated 3/22 are as follows:
The internal CPU board was replaced in order to address the booting issue. The side panel was replaced. Upon final diagnostic inspection/testing, the camera was determined to be within specification and no trouble issues were found. The camera was released to the customer.
For the second, the repair details on official RED repair report dated 3/22 are as follows:
The internal fan assembly was cleaned, the U/I LCD was replaced, and the side panel was also replaced. Upon final diagnostic inspection/testing, the camera was determined to be within specification and no trouble issues were found.
Hey guys, I just painstakingly assembled all of the items necessary for this COMPLETE 2-Camera RED-MX package for a project that has been canceled. Everything is in excellent shape, batteries are good, both cameras just came back from RED with a bill of good health (details below).
PACKAGE INCLUDES
HARDWARE
(2) RED MXs with PL Mount
(2) RED Nikon Mount
(4) 12" 19mm Steel Rods
(4) 18" 19mm Steel Rods
(2) 19mm RED Bottom Plate
(4) 19mm RED Top Mount
(2) RED Shoulder Dovetail
(2) RED Cradle w/ Universal Mount
(1) RED Handle - Right
(1) RED Handle - Left
(2) RED Top Handle
(2) Element Technica Short Riser
(2) Element Technica EVF Mounts
(2) Element Technica 15mm Topside Combo
(2) Element Technica 15mm Bridge Plate
(2) Elements Breakout Box
DISPLAYS
(2) RED EVF
(2) Elements EVF Guard
(1) RED LCD - 5"
(1) RED LCD - 7"
(2) RED Arm - 5"
(4) RED LCD/EVF Cable - 24" L-to-L
MEDIA
(20) RED 16GB CF Cards
(2) FW800 CF Card Reader
(2) RED 320GB Drives
(3) RED Drive Cable - 18"
(4) RED Drive AC Adapter
(2) FW800 Cables
POWER
(2) RED One AC Adapter
(4) RED Bricks
(2) RED Brick Chargers
(2) 2B-to-XLR Power Cable (10')
LENSES
Red Pro Primes
- 18mm T1.8
- 25mm T1.8
- 35mm T1.8
- 50mm T1.8
- 85mm T1.8
- 100mm T1.8
New Focus Marks by Duclos
CASES
(2) Anvil Cases for MXs
(1) Anvil Case for RPPS
Both RED MX's were sent this past month to RED for transfer of ownership and evaluation and any issues found were fixed by RED. I have not used either cameras since getting them back from RED so you would be getting them in excellent working condition.
For the first, the repair details on official RED repair report dated 3/22 are as follows:
The internal CPU board was replaced in order to address the booting issue. The side panel was replaced. Upon final diagnostic inspection/testing, the camera was determined to be within specification and no trouble issues were found. The camera was released to the customer.
For the second, the repair details on official RED repair report dated 3/22 are as follows:
The internal fan assembly was cleaned, the U/I LCD was replaced, and the side panel was also replaced. Upon final diagnostic inspection/testing, the camera was determined to be within specification and no trouble issues were found.
