Speed Ramping

[Tom Chase]

Quick question is there any easy way to setup a setting (hotkey or DSMC side handle buttons) to go say 4K/24 FPS ----> 4K/120FPS ----> 4K/24FPS?

I know how to setup up the first half - 24FPS--->120FPS but bringing it back to 24FPS, would that be assigning a second key/button to go from the current framerate (i.e.:120FPS) back to 24?

Thank

Tommy

 

[Russ Fill]

+1,

I asked a long while back but seems things have changed enough from the first time I asked this to be able to do a back and forth speed ramp. Maybe be just a second Key assigned to go from a present frame rate to 24fps???
good question.

 

[Trent Lillehaugen]

The current ramp system allows the setup of 4 different ramp target frame rates (and speeds): A, B, C, D. There is also a ramp RESET with a speed only that returns to the original frame rate. There are five assignable key actions: ramp to A/B/C/D/Reset. You can accomplish what you want either setting up two ramp points or one ramp point and the reset feature.

 

[Tom Chase]

Ummm, do you know where to setup the ramp RESET? Is it in the firmware manual or do you know of a tutorial on how to set these up?

 

[Trent Lillehaugen]

I'm pretty sure ramping is covered in the User Manual.

Go to Menu > Settings > Recording, on the Mode tab set "Recording Mode" to "Speed Ramp Mode". If the dialog is not clear enough you can access online help in the camera by tapping on the "Help" button on the top bar.

 

[Tom Chase]

Thanks

 

[Eric Santiago]

Trent your reply made me think that you can be REDs SIRI

With a little bit of attitude which I like

LOL!