Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Seeing RED Spots on screen on Sunset Sets

Neil Dearman

Well-known member
Joined
Sep 2, 2012
Messages
1,127
Reaction score
0
Points
0
Location
Atlanta/Nashville
Website
neildearman.com
Getting weird RED Spots when filming sunsets and also sometimes get weird reflections too, I use ND filters/Mattebox too? Any reason why this is happening and this bad/an issue?
 
what is your t-stop at? If its a pattern then open up your t-stop to get rid of the OLPF pattern caused by too much light bouncing between the OLPF and sensor.
 
it depends around F4/5.6 at the day and 2.8 at night
 
less than a year old will take to my bomb squad rep
 
Can you post any stills?
 
how do put a pic without using an url?
 
photo1_zps8c649164.jpg
Looks like the OLPF pattern, But shouldn't be showing up if your at 4-5.6 split. Usually shows up if your at a 11 or 16
 
photo(1).jpg
 
Okay so what does that mean? is this bad please confirm?
 
Those spots are sun reflections.

The sun is coming through the lens, hitting the OLPF, bouncing back off the back of the lens and back onto the OLPF, etc, This is occurs on RED EPIC MX when the sun hits the OLPF at a specify angle. I have seen it and it has been widely reported.

It's a pretty messy flare.

What lens were you using?

Battistella
 
RED PL 18-50 T3
 
Assume you are not on Dragon yet. There were a few in an early batch where the OLPF was put in the wrong way round which could cause this.
 
This is a well-known issue with the Mysterium-X sensor going back to the Red One days. You can try to add ND and open up your iris for the sun dots, but that doesn't always solve it and you just have to recompose your shot. And in low light you will often get single red dot flares from a hot light sources, such as a bare bulbs, gas lanterns, etc.

It's all manageable if your aware of it, but if you don't want to ever see it you need to switch to Dragon, Alexa or film.
 
The M and MX both showed the magenta OLPF flare. Dragon also shows it with the original OLPF and it can get particularly nasty in situations where the OLPF was installed backwards. Technically, all digital cameras, OLPF or not, can show a bounce-back flare because the sensor/ OLPF are reflective surfaces. And there's always those who like to chime in with statements like "XXXXX camera doesn't do it" or whatever. But that is nonsense -- Alexa, F65, etc.. can all show similar flares. The spots tend to be larger, more diffuse and slightly teal/ sea foam in color on the Alexa. ;) Anyway, that said, this sort of flare has been rather easy to achieve on RED cameras thus far, or a lot easier than it should be. It seems that RED has done a great job at addressing this with the latest Dragon OLPF.
 
Back
Top