Welcome to our community

Be a part of something great, join today!

Register Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

RELEASED: Beta REDCINE-X (Build 252) & REDline (Build 252) - BETA

Brent Carter

Brent Carter

REDUSER.NET
Joined
Aug 22, 2007
Messages
4,992
Reaction score
5
Points
0
Location
Irvine CA
We have released the following on www.red.com/support today: http://www.red.com/support/release_history/2196541 .

Please see release notes and/or readme files for further details.

NOTE: New version of REDline also in release notes for these versions of REDCINE-X.

ALWAYS READ ALL INSTRUCTIONS CONTAINED IN THE DOWNLOADED INSTALLATION FILES BEFORE PROCEEDING.

WARNING: AS THESE ARE BETA BUILDS, THEY ARE RECOMMENDED FOR PREVIEW AND TESTING PURPOSES ONLY. THEY ARE NOT RECOMMENDED FOR USE ON COMMERCIAL PRODUCTIONS.

If you have any questions or feedback, please contact RED Technical Support at www.red.com/support.

Thanks, BC
 
Noticed the playback without RR so much better now. Kudos to the RED team.
 
Is there anything else needed to install for my redrocket? Coming from build 221 and redline 194.
 
Are there docs posted anywhere on how to use RedLine for windows?

Thanks,
Keith
 
Tangent Wave Controls

Tangent Wave Controls

Hello,

I can see and feel a lot of the improvements. Great job, guys! :thumbsup:

The only thing I continue to experience is the lack of sensitivity that the Tangent Wave wheels have. It is day and night how it responds within other softwares, but it is really frustrating since build 121...

Any update on when this will be addressed, and maybe when should we expect a transport buttons/controls assignment functionality? It really has so many butons that are kind of wasted, for which I have a lot of idea as to how to use them once we can assign specific tasks to them. :violin:

Cheers!
 
where can i find latest RR drivers and formware 1.3.2.0 & 1.1.8.4 that is what REDcine x is asking for?
 
Hi RED team,
thanks a lot for your hard work.
I still noticed one minor bug.
When you toggle to fullscreenmode with 2 different sized screens and then go back to one screen mode on the smaller one, you will have no chance to resize your playerscreen, because its to big.
This setup is common with notebooks and a second screen...
I know about Redcine-x customlayouts, but if you didn´t do it at startup, you are in trouble.
How about a layoutreset/layoutdefault button?
 
Many thanks...:thumbup:
 
Crashing on Export ...

Crashing on Export ...

I have sent my log files to Deanan for inspection. But I thought that I would see if anyone else is having these same problems:

RedCine-X is crashing every time I try and export out footage that has been cropped. I am taking 4.5k footage and cropping it down to 4k 16x9, and exporting out ProRes 4444 files. I can export out 4.5k just fine, but it is only when I add on the cropping of the frame that I run into issues ...
 
i updated drivers and firmware now when i open rocketcine i get

Your RedRocket driver is out of date. You have version: 0.0.0.0, you need version 1.1.4.0


Your RedRocket firmware is out of date. You have version: 0.0.0.0, you need version 1.1.6.8

Your RedRocket is in a 0x PCI-Ex Lane. The RedRocket requires an 8x lane to perform properly.

Your RedRocket has detected a PCI-Ex speed of 0. The RedRocket requires a minimum of 250 to perform properly.

Your RedRocket has detected a PCI-Ex Lane width of 0. The RedRocket requires a minimum of 64 to perform properly.

any thoughts anyone?
 
Tangent Wave panel Windows support

Tangent Wave panel Windows support

Hey RED Team,
when can we expect support of wave panel in windows version ?
I bought one to use it with redcine-x before I know it does not work in windows version and now it is all in dust.:banghead:

thanks in advance

cheers :cheers2:
 
Ryan E. Walters said:
I have sent my log files to Deanan for inspection. But I thought that I would see if anyone else is having these same problems:

RedCine-X is crashing every time I try and export out footage that has been cropped. I am taking 4.5k footage and cropping it down to 4k 16x9, and exporting out ProRes 4444 files. I can export out 4.5k just fine, but it is only when I add on the cropping of the frame that I run into issues ...
Click to expand...

If you have BUGS to report, please email redcinex - at - red - dot - com. Only emails with log files and crash reports will be reviewed.

Thanks, BC
 
Dustin Cross said:
Robert,

Rocketcine is end of life and not supported the new Red Rocket firmware. Kinda sucks because Rocketcine is rendering faster for me than Redcine X with Rocket.


Dusty
Click to expand...

I had no idea, i use Rocket cine much more than redcine x, it's much more stable for me.
 
Brent@RED said:
If you have BUGS to report, please email redcinex - at - red - dot - com. Only emails with log files and crash reports will be reviewed.

Thanks, BC
Click to expand...

Already done. :) I'm VERY impressed with how quick the response is- great job Team Red. :)

BTW- it seems that I was partially at fault for the problem, as I had not changed the crop numbers from the default 0,0- which is why the app would not export and crop my files. Why it caused RCX to crash is another matter ...

Thanks again.
 
You must log in or register to reply here.
Back
Top