tim ottowitz
Well-known member
- Joined
- Jul 10, 2014
- Messages
- 246
- Reaction score
- 0
- Points
- 0
Price: 8100 USD
Camera has less than 200 hours up on arrival.
Standard OLPF
Skin tone OLPF
Hotlnk system for wireless control of the camera
EF mount (Red)
PL Mount (Wooden Camera)
1x 240gb Redmag
1x 128gb Redmag
1x Redmag reader USB 3.0
4x small redvolt batteries for sidehandle (used for around 80 hours)
Quad Charger for redvolts
2x small single charger (great for travel)
Red Quickrelease platform & Kamera Platte https://vimeo.com/39225593
Tophandle Wooden Camera
Wooden Camera V-Mount plate
Photos:
https://ibb.co/gRVYgU
https://ibb.co/eV0oFp
https://ibb.co/gCrvvp
https://ibb.co/j2NPo9
https://ibb.co/ciLoFp
https://ibb.co/gVbjo9
https://ibb.co/hPOm1U
https://ibb.co/mPMvvp
https://ibb.co/fFqc89
https://ibb.co/cvztgU
https://ibb.co/hxgjo9
https://ibb.co/fACqT9
https://ibb.co/cDVzMU
https://ibb.co/jf4R1U
https://ibb.co/hcOKMU
https://ibb.co/j2NPo9
https://ibb.co/d27eMU
The v-mount late was attached directly to the body by an engineer to reduce weight. The back of the camera wasn't modified though. Also the side handle was cut around 3 cm shorter at the end as attached v-mount batteries are so close to the body. We did this work to get the most lightweight system for gimbal and doc travel jobs. The camera itself honestly is in fantastic condition with very low hours. I bought it new from Red Germany back in 2015 but only used it for 1 year before we got an alexa mini. It wasn't used for around 2 years and sits on a shelf. Hence the low hours.
I give the sidehandle with it for free as the enter button is stuck. A common problem with the sidehandle. I was told it needs compressed air pushed into the button to fix it. I layed out the enter button on one of the custom buttons on the handle which solved the problem. Following up with pictures.
Location: Germany
I send the package world wide via DHL express international.
Camera has less than 200 hours up on arrival.
Standard OLPF
Skin tone OLPF
Hotlnk system for wireless control of the camera
EF mount (Red)
PL Mount (Wooden Camera)
1x 240gb Redmag
1x 128gb Redmag
1x Redmag reader USB 3.0
4x small redvolt batteries for sidehandle (used for around 80 hours)
Quad Charger for redvolts
2x small single charger (great for travel)
Red Quickrelease platform & Kamera Platte https://vimeo.com/39225593
Tophandle Wooden Camera
Wooden Camera V-Mount plate
Photos:
https://ibb.co/gRVYgU
https://ibb.co/eV0oFp
https://ibb.co/gCrvvp
https://ibb.co/j2NPo9
https://ibb.co/ciLoFp
https://ibb.co/gVbjo9
https://ibb.co/hPOm1U
https://ibb.co/mPMvvp
https://ibb.co/fFqc89
https://ibb.co/cvztgU
https://ibb.co/hxgjo9
https://ibb.co/fACqT9
https://ibb.co/cDVzMU
https://ibb.co/jf4R1U
https://ibb.co/hcOKMU
https://ibb.co/j2NPo9
https://ibb.co/d27eMU
The v-mount late was attached directly to the body by an engineer to reduce weight. The back of the camera wasn't modified though. Also the side handle was cut around 3 cm shorter at the end as attached v-mount batteries are so close to the body. We did this work to get the most lightweight system for gimbal and doc travel jobs. The camera itself honestly is in fantastic condition with very low hours. I bought it new from Red Germany back in 2015 but only used it for 1 year before we got an alexa mini. It wasn't used for around 2 years and sits on a shelf. Hence the low hours.
I give the sidehandle with it for free as the enter button is stuck. A common problem with the sidehandle. I was told it needs compressed air pushed into the button to fix it. I layed out the enter button on one of the custom buttons on the handle which solved the problem. Following up with pictures.
Location: Germany
I send the package world wide via DHL express international.
Last edited:
