Kitersfa
Active member
I am selling my battled tested Red One MX with Red Pro 7in, 640gig Red Drive, Nikon mount, battery/charger, 4 power options and much more! $9,500 and I'll take it off of ebay or bid on ebay. Thanks
You can see more pics on ebay @ http://www.ebay.com/itm/Red-One-MX-LOW-HOURS-/190858096992?pt=LH_DefaultDomain_0&hash=item2c70077160
I only used it for one feature and just sent the camera in to Red to have it cleaned and make sure there are no issues. It came back cleaned with no issues so she's ready to go. Once I have a buyer I will make sure to transfer the rights of the Red over to you correctly so if you have any issues Red will take care of you as the new owner. There should be no transfer charges but if so I will pay them. This camera might as well be new. It's the best version of the Red One MX you can get on the market. They are not making these any more so they are limited and harder to find. I'm selling this camera because I have an Epic now and love it and want to keep it as a backup but just can't afford to keep it too. Thanks and good luck! Below is a list of what all it comes with.
LOW HOURS 258hrs (as seen in picture)
This camera has a SSD Reader on the camera so you dont have to use the drive (other Reds might only allow for CF cards) but you would have to buy some cards.
Red MX package comes with the following:
Red One MX (with SSD) and PL mount
1x 7in Red Pro LCD monitor (in good shape, just some small scratches on the edges, not the screen)
1x 18in Red LCD cable for monitor
1x 7in Hoodman
1x 640gig Red Drive (with power supply though it doesn't need the power with FW 800)
1x Red Drive cable
1x Red Cradle (holds Red Drive and brick) NOTE: The cradle is meant for 19mm rods but the top rods on the camera are 15mm. You will see in the picture above that I used a red wire which fills the 15mm to 19mm gap relatively well and it doesn't really slide, it worked just fine for a feature that was all handheld)
1x Red Nikon Mount (Allows you to use your Nikon lenses obviously)
1x Red Top Handle
2x Red Handles 19mm (One of which comes with a 15mm to 19mm adapter so you can connect one handle to the 15mm rods, you need to get another adapter to use the second handle if needed)
2x Element Technica top mount 15mm
2x 15mm Steel rods on top of camera
2x Carbon fiber 19mm 12 in rods (they are bonus though you would need to get an adapter to work with the 15mm rods)
2x 6in 15mm screw in steel rods (for the front of camera to mount follow focus and or mattebox)
1x Front mount (Screws onto the front of the Red to allow you to screw in the 15mm steel rods)
1x Israeli Arm
1x Red Charger (NOTE: only one side charges)
1x Red Brick (used but holds a good charge)
3 EXTRA POWER OPTIONS (other then the cradle listed above)
1x Red Battery belt clip
1x Red Battery Plate 15mm (grabs ahold of the 15mm rods on top)
1x Red DC Power Supply
2x Mini XLR to XLR cables(allows you to run sound directly to the camera)
1x Red Bolt Set
Feel free to ask me any questions you have about the camera.
You can see more pics on ebay @ http://www.ebay.com/itm/Red-One-MX-LOW-HOURS-/190858096992?pt=LH_DefaultDomain_0&hash=item2c70077160
I only used it for one feature and just sent the camera in to Red to have it cleaned and make sure there are no issues. It came back cleaned with no issues so she's ready to go. Once I have a buyer I will make sure to transfer the rights of the Red over to you correctly so if you have any issues Red will take care of you as the new owner. There should be no transfer charges but if so I will pay them. This camera might as well be new. It's the best version of the Red One MX you can get on the market. They are not making these any more so they are limited and harder to find. I'm selling this camera because I have an Epic now and love it and want to keep it as a backup but just can't afford to keep it too. Thanks and good luck! Below is a list of what all it comes with.
LOW HOURS 258hrs (as seen in picture)
This camera has a SSD Reader on the camera so you dont have to use the drive (other Reds might only allow for CF cards) but you would have to buy some cards.
Red MX package comes with the following:
Red One MX (with SSD) and PL mount
1x 7in Red Pro LCD monitor (in good shape, just some small scratches on the edges, not the screen)
1x 18in Red LCD cable for monitor
1x 7in Hoodman
1x 640gig Red Drive (with power supply though it doesn't need the power with FW 800)
1x Red Drive cable
1x Red Cradle (holds Red Drive and brick) NOTE: The cradle is meant for 19mm rods but the top rods on the camera are 15mm. You will see in the picture above that I used a red wire which fills the 15mm to 19mm gap relatively well and it doesn't really slide, it worked just fine for a feature that was all handheld)
1x Red Nikon Mount (Allows you to use your Nikon lenses obviously)
1x Red Top Handle
2x Red Handles 19mm (One of which comes with a 15mm to 19mm adapter so you can connect one handle to the 15mm rods, you need to get another adapter to use the second handle if needed)
2x Element Technica top mount 15mm
2x 15mm Steel rods on top of camera
2x Carbon fiber 19mm 12 in rods (they are bonus though you would need to get an adapter to work with the 15mm rods)
2x 6in 15mm screw in steel rods (for the front of camera to mount follow focus and or mattebox)
1x Front mount (Screws onto the front of the Red to allow you to screw in the 15mm steel rods)
1x Israeli Arm
1x Red Charger (NOTE: only one side charges)
1x Red Brick (used but holds a good charge)
3 EXTRA POWER OPTIONS (other then the cradle listed above)
1x Red Battery belt clip
1x Red Battery Plate 15mm (grabs ahold of the 15mm rods on top)
1x Red DC Power Supply
2x Mini XLR to XLR cables(allows you to run sound directly to the camera)
1x Red Bolt Set
Feel free to ask me any questions you have about the camera.
