Jan Sluchak
Member
- Joined
- Dec 15, 2016
- Messages
- 14
- Reaction score
- 0
- Points
- 0
Red One MX Body and Huge accessory package—READ!
Red One MX body # 1997
Plus RED ROCKET CARD IN HOUSING WITH ALL CABLES.
I am an SOC operator, my personal gear
Just turned 2000 hours.
4.5” RED CAMERA MONITOR
RED CAMERA VIEWFINDER
COMPLETE E technica STUDIO VEWFINDER SUPPORT WITH EXTENSIONS
PL mount, Nikon mount (currently installed)
3x 640mb Red Drives 2 with E Technica Anti shock mount
1x 320mb Red Drives One with E Technica Anti shock mount.
CF Card RED recording camera side.
CF CARD TRANSFER UNIT
7x 16mb Red Cards CF
RED 4.5” MONITOR
3x AC to DC studio adapter units and cable!!
E Technica viewfinder support
E Technica Video Breakout side box.
Top cheese plate 15mm
Bottom mount with sliding bridgeplate 15mm E technica
E technica wide camera handle rig unit.--Solid item attached to above sliding studio bridgeplate.
18” Rods
8” Rods
Red Arm
CE Arm.
View finder cable
Monitor cable
XLR to mini XLR adapter cable set up
Front studio rod support.
Extra front studio rod support
Red mount V mount saddle plate
Red Mount with w 15mm Bracket
6’ power cable
Remote Battery power plate for use with 6’ cable. (for cold weather or jibs)
Extended Start Stop cable for jib operation
Red tools bundle
Sigma 28-300 Zoom lens in Nikon mount
Pelican 1620 for body and camera.
Collection of extra parts: Extra Cables that are intermittent or do not work, thought Id include them if you can fix them. I collected them around town. These are for parts or to fix
Two Red 4.5 monitors in parts. (Purchase the LVM056WSD-LA LCD screen part on Ebay or Alibaba ($100)and plug it in to the monitor shell. You have a new monitor!). That is an operators/owners secret!
RED ROCKET CARD AND M ENCLOSURE was included with my camera when I purchased it. I just put it into the correct E box but have not tested it as I don’t use APPLE COMPUTERS. I don’t know if I installed it correctly so you may have to slide it apart and reinstall it Just fyi. These are really neat for editing I understand.
I am registered owner of this RED ONE MX and will assist you in transfer.
Buy it, trade the body in and sell off accessories or use them.
I did not have any overheat issues and and mainly used it in the studio for interviews (long running ones). I did some exteriors of course and it was great. Did some time lapse and High speed too. It works without issue.
This is an extensive Package so errors may exist with some minor descriptions and inclusions but photos are the best description. RED transfer which should be free now. Id like to sell it in the US so shipping is easy. Actual shipping will be charged and we can work that out or give me your FedEx number if your company has negotiated a great deal with them. Pay Pal is preferred or certified funds held to clear.
I know all the tricks so no scamsters OK?
Shipping should be around $245 with in the USA. I prefer to use you Fed ex number so you are not overcharged.
Im working on photos so hopefully I'll have them soon.
Selling due to a back injury and I have some down time.
Again a huge package so ask questions and score big. I cannot accept returns on such a sophisticated package with so many parts.
I want $6500 for the entire package.
Give me a call and lets talk about it. West Coat time, USA. I want to sell this, its not being used, but its made a lot of money 4 me. This gets you going immediately.
Contact
JAN SLUCHAK soc
775 69 zero 2 one one 7
J sl u chak@p a c b e l l . net (take out spaces)
Reno, NV
Thanks for looking and your consideration.
Red One MX body # 1997
Plus RED ROCKET CARD IN HOUSING WITH ALL CABLES.
I am an SOC operator, my personal gear
Just turned 2000 hours.
4.5” RED CAMERA MONITOR
RED CAMERA VIEWFINDER
COMPLETE E technica STUDIO VEWFINDER SUPPORT WITH EXTENSIONS
PL mount, Nikon mount (currently installed)
3x 640mb Red Drives 2 with E Technica Anti shock mount
1x 320mb Red Drives One with E Technica Anti shock mount.
CF Card RED recording camera side.
CF CARD TRANSFER UNIT
7x 16mb Red Cards CF
RED 4.5” MONITOR
3x AC to DC studio adapter units and cable!!
E Technica viewfinder support
E Technica Video Breakout side box.
Top cheese plate 15mm
Bottom mount with sliding bridgeplate 15mm E technica
E technica wide camera handle rig unit.--Solid item attached to above sliding studio bridgeplate.
18” Rods
8” Rods
Red Arm
CE Arm.
View finder cable
Monitor cable
XLR to mini XLR adapter cable set up
Front studio rod support.
Extra front studio rod support
Red mount V mount saddle plate
Red Mount with w 15mm Bracket
6’ power cable
Remote Battery power plate for use with 6’ cable. (for cold weather or jibs)
Extended Start Stop cable for jib operation
Red tools bundle
Sigma 28-300 Zoom lens in Nikon mount
Pelican 1620 for body and camera.
Collection of extra parts: Extra Cables that are intermittent or do not work, thought Id include them if you can fix them. I collected them around town. These are for parts or to fix
Two Red 4.5 monitors in parts. (Purchase the LVM056WSD-LA LCD screen part on Ebay or Alibaba ($100)and plug it in to the monitor shell. You have a new monitor!). That is an operators/owners secret!
RED ROCKET CARD AND M ENCLOSURE was included with my camera when I purchased it. I just put it into the correct E box but have not tested it as I don’t use APPLE COMPUTERS. I don’t know if I installed it correctly so you may have to slide it apart and reinstall it Just fyi. These are really neat for editing I understand.
I am registered owner of this RED ONE MX and will assist you in transfer.
Buy it, trade the body in and sell off accessories or use them.
I did not have any overheat issues and and mainly used it in the studio for interviews (long running ones). I did some exteriors of course and it was great. Did some time lapse and High speed too. It works without issue.
This is an extensive Package so errors may exist with some minor descriptions and inclusions but photos are the best description. RED transfer which should be free now. Id like to sell it in the US so shipping is easy. Actual shipping will be charged and we can work that out or give me your FedEx number if your company has negotiated a great deal with them. Pay Pal is preferred or certified funds held to clear.
I know all the tricks so no scamsters OK?
Shipping should be around $245 with in the USA. I prefer to use you Fed ex number so you are not overcharged.
Im working on photos so hopefully I'll have them soon.
Selling due to a back injury and I have some down time.
Again a huge package so ask questions and score big. I cannot accept returns on such a sophisticated package with so many parts.
I want $6500 for the entire package.
Give me a call and lets talk about it. West Coat time, USA. I want to sell this, its not being used, but its made a lot of money 4 me. This gets you going immediately.
Contact
JAN SLUCHAK soc
775 69 zero 2 one one 7
J sl u chak@p a c b e l l . net (take out spaces)
Reno, NV
Thanks for looking and your consideration.
Last edited: