Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

RED Mag ssd doesnt seem to fit?

jake southard

Well-known member
Joined
Apr 29, 2014
Messages
705
Reaction score
9
Points
18
Location
Beverly Hills, CA
Website
www.jakesouthard.net
I just installed an SSD module on my RED One, and the 128GB red mag is SO TIGHT. Its almost impossible to get out of the ssd module. Is this normal?? What the heck I cant believe it is this tight of a fit. Is something wrong? I ordered it from a guy off these forums
 
Never had that issue. By any chance, is the temperature really cold, or really hot? sometimes expansion/contraction can affect things that slide. Do you have any other mags to compare it to? check with a pair of calipers if the card you bought used has been deformed in any dimension
 
Well I suppose it could be really hot.. I just got it in the mail today so best could be an issue.. Doesn't look to be deformed, I'll have to let it cool down more and try it again, I only have 1 mag. I doubt heat is the problem though honestly...
 
You could try...

Shine a flashlight into the slot and check to make sure there are no bent pins.
double check that the screws in the SSD are also secure.
double check that you have not over tightened the module as well, if you loosen a 1/4 turn on each screw does it help?

battistella
 
Some of them are tight fits which is good as they won't vibrate loose during use, but it shouldn't be crazy tight.

Check or scratches/scoring/rubbing on your Red Mag and the SSD module slot to identify where the tight spots are, and examine them closely for debris, camera tape adhesive, burrs in the metal, etc.

Also check your Red Mag being slightly warped/bent - this can happen if it was ever carried in someone's jeans pocket and they sat on it!
 
I just tried un tightening the module screws, this might have helped a little... its just soooooo tight. I think it loosened up a little.. I can manage to get it in and out, but theres still a ton of friction the whole time im pushing it in. Doesnt appear to be a bent SSD, the pins are all fine inside the module. Guess I'll just have to settle with a super tight SSD. Least I dont have to worry about it falling out haha
Tighter is always better right? :thumbup:
 
I had the same problem with one of my Red Mags. You almost have to let it wear in. When it starts to wear a bit it will fit nicely. I hated it at first but now it sits snugger than all of my other Red Mags.
 
Back
Top