Grzegorz Gill
Well-known member
- Joined
- Sep 2, 2010
- Messages
- 457
- Reaction score
- 0
- Points
- 16
- Location
- Los Angeles, CA
- Website
- cargocollective.com
Hi,
I am selling my Red Helium Camera Body that includes the following:
1x Body Port Cap
1x Standard OLPF
1x DSMC 2 Power Adapter (Not Pictured)
I am the original owner and this was purchased Nov 2016 as an Epic W and then upgraded to the Unified DSMC 2 Body and 8k 60fps specs on Aug 2018. This camera has been my work horse since purchase and will continue to produce for the next owner op. Only reason for sale is I need to liquidate this Red and accessories to make room for a set of Atlas Anamorphics.
The camera has wear at the bottom of the body from baseplates coming on and off. The paint on the E has chipped away. Camera right side has small mark from accessories rubbing against the body like noga arms slipping. Body has no dents, never been dropped or mishandled except the mentioned scratches. Both pogo connections work just fine. I use a 4.7 touch on top, and a bomb evf on the left side. I have mounted a red side handle, and connections work as well. The rear contacts are clean and clear as I have used a dsmc2 v-lock i/o expander since original purchase.
Included is the standard OLPF. The OLPF has never been taken off and is clean and clear. Firmware is up to date with a recent auto black shade calibration, clean blacks and no dead pixels. Also to note the camera has never been in an underwater environment or any work with lasers. I've been a red owner/operator since 2012 and I take pride in taking care of my gear. This kit will work perfectly with no surprises saving you cash as the body lists $24,500 new.
Operating hours as of 5.11.2020 is 1415
Asking $18,000. Also Ebay link > https://www.ebay.com/itm/333596680413
Below is the itemized list of items for sale also if you choose to pick up the body. Mostly everything is marked 30% off red.com pricing. I am planning to sell the body first then accessories separately but I am open to offers for the whole lot. All items are based in Los Angeles for inspection.
1x*Canon Titanium Mount - $800
1x Red Canon Motion Mount - $1,700
1x Red PL Motion Mount - $1,700
1x Wooden Camera PL Mount - $350
1x DSMC 2 Side Handle - $750
1x DSMC V-Lock I/O Expander - $1,330
1x DSMC 2 4.7 Inch Toch Display - $1,015
1x Wooden Camera Tool Less Monitor Adapter - $100
1x Wooden Camera 4.7 Sunhood - $40
1x Red Bomb EVF LCOS - $650 (tiny dead pixels top of screen)
1x LCD/EVF Adapter A - $175
1x LCD/EVF Adapter B - $175
1x LCD/EVF Cable 18 Inch - $175
1x LCD/EVF Cable 24 Inch - $175
1x Wooden Camera 12 Inch Red Male Pogo to Male Lemo LCD/EVF Cable - $175
2x Red 512gb Mini Mag $2,030
1x Red USB C Mini Mag Reader - $136
1x G Tech USB 3 Mini Mag Reader - $136
1x Wooden Camera Passthrough Top Plate - $245
1x Wooden Camera Easy Riser - $112
1x Wooden Camera 15mm Light Weight Bracket - $100
1x DSMC 2 Universal Top Handle - $100
6x Red Brick 150wh - $1,500
2x Red Brick Charger - $500
Thanks,
-GG
I am selling my Red Helium Camera Body that includes the following:
1x Body Port Cap
1x Standard OLPF
1x DSMC 2 Power Adapter (Not Pictured)
I am the original owner and this was purchased Nov 2016 as an Epic W and then upgraded to the Unified DSMC 2 Body and 8k 60fps specs on Aug 2018. This camera has been my work horse since purchase and will continue to produce for the next owner op. Only reason for sale is I need to liquidate this Red and accessories to make room for a set of Atlas Anamorphics.
The camera has wear at the bottom of the body from baseplates coming on and off. The paint on the E has chipped away. Camera right side has small mark from accessories rubbing against the body like noga arms slipping. Body has no dents, never been dropped or mishandled except the mentioned scratches. Both pogo connections work just fine. I use a 4.7 touch on top, and a bomb evf on the left side. I have mounted a red side handle, and connections work as well. The rear contacts are clean and clear as I have used a dsmc2 v-lock i/o expander since original purchase.
Included is the standard OLPF. The OLPF has never been taken off and is clean and clear. Firmware is up to date with a recent auto black shade calibration, clean blacks and no dead pixels. Also to note the camera has never been in an underwater environment or any work with lasers. I've been a red owner/operator since 2012 and I take pride in taking care of my gear. This kit will work perfectly with no surprises saving you cash as the body lists $24,500 new.
Operating hours as of 5.11.2020 is 1415
Asking $18,000. Also Ebay link > https://www.ebay.com/itm/333596680413
Below is the itemized list of items for sale also if you choose to pick up the body. Mostly everything is marked 30% off red.com pricing. I am planning to sell the body first then accessories separately but I am open to offers for the whole lot. All items are based in Los Angeles for inspection.
1x*Canon Titanium Mount - $800
1x Red Canon Motion Mount - $1,700
1x Red PL Motion Mount - $1,700
1x Wooden Camera PL Mount - $350
1x DSMC 2 Side Handle - $750
1x DSMC V-Lock I/O Expander - $1,330
1x DSMC 2 4.7 Inch Toch Display - $1,015
1x Wooden Camera Tool Less Monitor Adapter - $100
1x Wooden Camera 4.7 Sunhood - $40
1x Red Bomb EVF LCOS - $650 (tiny dead pixels top of screen)
1x LCD/EVF Adapter A - $175
1x LCD/EVF Adapter B - $175
1x LCD/EVF Cable 18 Inch - $175
1x LCD/EVF Cable 24 Inch - $175
1x Wooden Camera 12 Inch Red Male Pogo to Male Lemo LCD/EVF Cable - $175
2x Red 512gb Mini Mag $2,030
1x Red USB C Mini Mag Reader - $136
1x G Tech USB 3 Mini Mag Reader - $136
1x Wooden Camera Passthrough Top Plate - $245
1x Wooden Camera Easy Riser - $112
1x Wooden Camera 15mm Light Weight Bracket - $100
1x DSMC 2 Universal Top Handle - $100
6x Red Brick 150wh - $1,500
2x Red Brick Charger - $500
Thanks,
-GG
Attachments
Last edited: