Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

RED Food Product Shots Motion Control

Ted Chu

Well-known member
Joined
May 25, 2008
Messages
150
Reaction score
0
Points
0
Lenses -- Arriflex Macro Lenses, Abel Cine Tech (Mitch Gross and others), NYC
Motion Control Rig -- MILO at Cine Magic, NYC

I was at first concerned about shooting food products with the RED: flickering candles, shiny surfaces, steam, macro motion, full spectrum of colors, etc., but IMHO the spot turned out great. Did not see any digital artifacts in my footage! I shot with a 80C filter at 100 ASA using tungsten lights at 23.98FPS with a 180 degree shutter.

Attached are the unretouched stills -- QT 2K and a smaller compressed file can be watched/downloaded at http://fileshare.tedchu.com
 
Lovely. Great work Ted.
 
Looks great! Would you mind talking briefly about some of your lighting setups? I am shooting a cooking pilot soon that will require some food shots also. Thanks.
 
RED Food Product Shots

RED Food Product Shots

Sure, any specific questions?

Looks great! Would you mind talking briefly about some of your lighting setups? I am shooting a cooking pilot soon that will require some food shots also. Thanks.
 
Ted,

Wow, you were pumping a lot of light then, considering the 80C and the 100ASA.
Looks great. Did you do tests that indicated the 80C would be a must? And why 100 ASA? I assume because you had the light power to do so. According to Jim, there is a small hit when rating that low. Did you notice anything? A slight softening?

Great work!
 
Ted,

Wow, you were pumping a lot of light then, considering the 80C and the 100ASA.
Looks great. Did you do tests that indicated the 80C would be a must? And why 100 ASA? I assume because you had the light power to do so. According to Jim, there is a small hit when rating that low. Did you notice anything? A slight softening?

Great work!
Actually, sorry, I rated the RED at ASA 200 but ASA 100 with the 80C. No softening at all, I had a Panasonic 17" monitor and was careful regarding sharpness. I was shooting at a low depth of field, which with macro work can be dangerous. Light power was not an issue because I normally shoot food with a 10K or 20K through an 8X8 rag anyway. When I decided to shoot this on the RED and not film, I tested tungsten with and without an 80C at various ASA-s and looked at the 4K TIFFS with Photoshop. IMHO, I thought an 80C at 200 ASA, white balanced with my key (those lights are never 3200K and gets warmer still through an 8X8 rag) looked the best. I shot 4K and rendered it for the clients to 2K via FCP and they were thrilled. Thanks for the compliments.
 
Back
Top