Red, ET and other accessories and Cinetech Matte Box

[Walter R]

As we continue to clean out excess gear after a recent move, we have pulled together a bunch of bits and pieces.

ET O'Connor Dovetail for 2060/2575 heads: $325 (sold - pending payment)

ET Topside combo (cheese plate, plus top mounts for 15mm): $500
ET 15mm top mount (you can also use it like a univeral mount to bridge the bars): $175


Custom top handle. They mount easily on the top mounts (either ET or the Red top mounts) and you can use either a 12" or 18" 19mm rod. We used the 18" Red steel 19mm rods we had and they worked great to give a lot of places to grab and balance the camera when we were using big zooms or telephotos. We still use these, but these are extras. Price: $200

Red Handle: $100
Red Top Handle: $75 each

Red universal Mount: $75 each

Red cradle: $375
Red cradle (without battery mount): $200

 

[Walter R]

Cinetech Matte Box

Cinetech Matte Box

First, I have to say whether you get it from us or buy it new from Abel or someone else, these are great matte boxes. Simple, light and relatively inexpensive. We've used it for everything from big zooms to the Tokina 11-16mm.

This has 2 fixed 4x5.6 filter stages and a retaining ring for 138mm circular filter in the rotating bellows. It is for 15mm studio (100mm offset) rods and swings away. It also includes a set of hard mattes. It has the mount for a french flag, but we don't have a flag for it, so you'll need to get that from Cinetech if you want to use one. Although not shown in the photos, it comes with a 4x5.6 and a 4x4 filter holder.

We are only selling this because we've gone to all lightweight 15mm 60mm spacing) so this particular matte box doesn't fit. We do have another Cinetech matte box that is for the lightweight setup and we use it every time we pull out the Red. Compared to other matte boxes we've seen and used, this is really very light so it is great for handheld configurations.

$1150 including shipping in the continental US and paypal fees.

 

[Joshua O. Miller]

sent you a PM

 

[Walter R]

Several items sold. A lot of good stuff left in the posts above and here's some more.

This is a great Cavision lens support for 15mm studio setups. It adjusts both vertically and side to side so you can get a good fit and the big platform with a 1/4 20 screw to support your lenses. $120

Or maybe you need one of these handy adapters to put lightweight 15mm rods onto your Red. Use it with a 19mm universal mount. Yours for only $45

Or maybe you need to go from 15mm studio to 15mm lightweight for a smaller follow focus or Matte Box. These adapters come in handy. $60 each or $110 for the pair.

 

[Shane V8F]

Sent PM

 

[Vern Moen]

is your dovetail/bottom plate still for sale?
please email me @
ryan@longbeachfilmcompany.com

 

[Walter R]

Thanks for all the responses guys. I've updated some items as sold (or deleted them from the lists).

 

[Walter R]

Updated again with sold stuff removed and most of the Red accessories moved to the top post.

We also have some 19mm Rods for sale.

Red stainless 18" 19mm rods: $35 each or $60/pair or $110/4.

ET aluminum Ultra rods 18" 19mm: $50 each or $110/pair.