Red Dragon Weapon 6K Luts DSMC2

[Alex James]

Hey all,

Hope you are well and safe,

Is there a way to display the IPP2 Luts at all on the 6K Weapon? I know it has the Legacy menu but red somewhere you can display.

I know you have the option to do it via an external monitor.

I was just wondering if there is a way to monitor via the Red touch 4.7?

Thank you

 

[Patrick Tresch]

Depends on wich Weapon you have. The first Dragon Weapon didn't have IPP2, nor lut output (you could buy a 3rd party module though). Only what they call new "DSMC2" (or with the new standard boards) have it.

 

[Alex James]

Thank you its the Dsmc 2 version. Under image pipeline I have legacy - Red gamut and Log 310 but can't use a lut or bring one in

Thanks

 

[Bob Hoste]

you need to load the LUTS onto a minimag, then when it's in the camera you can load them from the mini mag to the camera body. Works good for monitoring, but won't do playback with the LUT from my experience

 

[Rao Shaheryar]

I read out the question I supported this answer which is also in this forum you need to load the LUTS onto a minimag, then when it's in the camera you can load them from the mini mag to the camera body. Works good for monitoring, but won't do playback with the LUT from my experience.

 

[Tommaso Alvisi]

Alex, don't underestimate the value of an external monitor with higher nits and larger image like 7" VS your tiny 4.7", nowadays basically all the monitors have LUT management, and that works in preview and playback, I always send log signal out of the camera (in this case Red Wide Gamut RGB and Log3G10) and delegate look to an external LUT box or monitor(s) on set.