Christoph Gelfand
Well-known member
- Joined
- Aug 27, 2013
- Messages
- 49
- Reaction score
- 0
- Points
- 0
Excellent condition, lightly used with 2 x Canon T5i. Looking for $385 shipped. Photos here.
Includes:
Original box
Light sensor
USB power cable
2 x sync cables (I used with Canon T5i)
2 x shoe mount sync
MicroSD card w/ Firmware 3068
The RamperPro by ElysiaVisuals delivers fully automatic exposure ramping to achieve smooth non-flickering timelapse compilations when shooting through dynamic and extreme lighting conditions. The RamperPro combines an external light sensor and jpeg image analysis from actual camera captured images adjusting RAW sidecar data for smooth transitions. Eliminate under or over exposed images since the actual stills are analyzed during a ramping shot.
True automatic exposure ramping of sunsets or sunrises. This is done by analyzing the images that are taken by your camera.
Purpose designed dedicated hardware
Highly portable, fits in your pocket
2.8" Touch screen interface
Dimmable backlight. Backlight will turn of fully in screen saver mode
All status leds can be shut off to prevent any light pollution
Dual camera support via a dual fully independent hardware pipelines
Two USB2 connections
Bulb exposure time measurement via two fully isolated power supplies
Optically isolated camera triggering
An external digital light sensor can be added to create a highly accurate fully automatic exposure ramper
All connections are electronically protected
Synchronized 3D mode
Image preview function with histogram
Exposure ramping mode with ISO shifting
Basic intervalometer
Automatic ramping mode
Interval fairing
XMP support for Adable After Effects and Corel Aftershots Pro
Direct integration with Dynamic Perception MX2 and MX3, eMotimo TB3 black and many other motion control solutions
Integrates out-of-the-box with DragonFrame stop motion software with the help of our DragonFrame adapter
Two MoCoBus connections. Can both act as bus master or slave
Built in accelerometer, the device is your joystick
nanoMoCo or NMx motion controller
5V input when no MoCoBus enabled hardware is connected
12-24V input when MoCoBus enabled hardware is connected
Built-in voltage meter that can monitor your battery power. A future version of the firmware will include an auto shutdown mode.
Includes:
Original box
Light sensor
USB power cable
2 x sync cables (I used with Canon T5i)
2 x shoe mount sync
MicroSD card w/ Firmware 3068
The RamperPro by ElysiaVisuals delivers fully automatic exposure ramping to achieve smooth non-flickering timelapse compilations when shooting through dynamic and extreme lighting conditions. The RamperPro combines an external light sensor and jpeg image analysis from actual camera captured images adjusting RAW sidecar data for smooth transitions. Eliminate under or over exposed images since the actual stills are analyzed during a ramping shot.
True automatic exposure ramping of sunsets or sunrises. This is done by analyzing the images that are taken by your camera.
Purpose designed dedicated hardware
Highly portable, fits in your pocket
2.8" Touch screen interface
Dimmable backlight. Backlight will turn of fully in screen saver mode
All status leds can be shut off to prevent any light pollution
Dual camera support via a dual fully independent hardware pipelines
Two USB2 connections
Bulb exposure time measurement via two fully isolated power supplies
Optically isolated camera triggering
An external digital light sensor can be added to create a highly accurate fully automatic exposure ramper
All connections are electronically protected
Synchronized 3D mode
Image preview function with histogram
Exposure ramping mode with ISO shifting
Basic intervalometer
Automatic ramping mode
Interval fairing
XMP support for Adable After Effects and Corel Aftershots Pro
Direct integration with Dynamic Perception MX2 and MX3, eMotimo TB3 black and many other motion control solutions
Integrates out-of-the-box with DragonFrame stop motion software with the help of our DragonFrame adapter
Two MoCoBus connections. Can both act as bus master or slave
Built in accelerometer, the device is your joystick
nanoMoCo or NMx motion controller
5V input when no MoCoBus enabled hardware is connected
12-24V input when MoCoBus enabled hardware is connected
Built-in voltage meter that can monitor your battery power. A future version of the firmware will include an auto shutdown mode.