O'Connor 2060HD with Tripod - Mint Condition!

[Alan Skinner]

Hey Guys, Moving to a lighter support system. Was hoping to keep the 2060 as well but have decided I need the 1030D now and need the dough to make the purchase.

This fluid head and aluminum full height tripod is "like new" condition. You can barely tell they have been out of the box.

$10,500.00 Free shipping to Continental U.S.A.

EDIT: Oh, and by the way, this is the RED Package Edition (all of the knobs and aluminum goodies are RED anodized!)

See my eBay:

http://www.ebay.com/itm/120998420326?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Sorry for the iPhone pics. I am happy to send more detailed photos to anyone seriously interested.

Free Shipping!

 

[Will Keir]

how much does the head weight?

 

[Alan Skinner]

Hi Will,
Below are the specs. I took them from the 150 mm ball mount and mine is a Mitchell mount but should be same.

I bought the 2060 for a fully dressed RED One. As I now have Epic and will mostly do Canon Lenses, I don't need the capacity of the 2060 but it sure is a smooth running head!

http://www.bhphotovideo.com/c/product/481861-REG/OConnor_2060HD_PKG_ULTIMATE_2060HD_Fluid_Head.html


Load Capacity 83.0 lbs (37.7 kg)
Diameter/Thread Mitchell
Counter Balance System Continuously variable dual-axis sinusoidal
Counter Balance Range 0 to 83 lbs (0 to 37.6 kg)
Center of Gravity 4.0 to 8.0" (10.2 to 20.3 cm)
Quick Release/Wedge Plate 120 mm Euro Plate, Arri Dovetail Plate, Panavision Dovetail Plate
Balance Plate Yes, Sliding
Tilt Drag Continuously variable fluid drag
Tilt Range +90 to -90°
Tilt Lock Caliper brake
Spring Loaded Counter Bal Continuously variable fluid drag
Pan Range 360°
Pan Lock Caliper brake
Leveling Bubble/Illuminated Yes, Illuminated
Temperature Range -40 to 140°F (-40 to 60°C)
Height 8.0" (20.3 cm)
Weight 16.2 lbs (7.3 kg)

 

[Will Keir]

That's lighter than the O'Connor 2065 or 2575 (23lbs each) for roughly the same payload. What's the draw back?

Can the head use 150m or Mitchell?

 

[Will Keir]

What sticks are those? Can't quite tell.

 

[Alan Skinner]

Hi Will,

Sorry for the delayed response. I was on a job.

The sticks are the O'Connor full height tripod. All fittings are red anodized. This was a RED "style" packaged tripod and fluid head:
http://www.ocon.com/products/tripods/cine-hd.html (Paid $2,160.00)

The tripod comes with full spreader system as well.

Not sure about how to convert the fluid head to ball mount. This 2060HD and Tripod are matching with Mitchell mount.

I am happy to take any more pics, closeups that anyone may want to see.

Alan

 

[Will Keir]

Thanks Alan, I'll consider it.

 

[Alan Skinner]

I believe I have seen a Mitchell to ball mount adapter but not sure where to find one. I also have a Mitchell hi-hat that I will throw in on the deal if anybody wants.

 

[Alan Skinner]

Very Humbly Bumped....................

 

[Costelloe Michael]

You can get one from Ronford Baker in the UK. Excellent gear, matched by their service.

I believe I have seen a Mitchell to ball mount adapter but not sure where to find one. I also have a Mitchell hi-hat that I will throw in on the deal if anybody wants.

 

[Michael Lindsay]

I have the new 1030 and the 2060s and the 1030 is pretty good but you might regret the loss?

Can i suggest you might consider some 2 stage carbon fibre legs (with a 150mm bowl top) and a very padded soft case and see if that shaves enough weight of?

just a thought

M