Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

[FS: OPTICS] NIPPONSCOPE Nippon Scope Anamorphic

Mark LaFleur

Well-known member
Joined
Dec 29, 2014
Messages
282
Reaction score
0
Points
16
Location
Los Angeles, CA
Website
www.oldfastglass.com
FOR SALE are 2 NIPPONSCOPE (or Nippon Scope) rear section of anamorphic lenses. These Nippon Scope anamorphic lenses were built in the 1970s. They had two different series of anamorphics. In this series, they would sell 1 anamorphic head (front section) with 2 or 3 swappable rear sections. If you are the owner of a Nippon Scope anamorphic front section, you could use these lenses to effectively add focal lengths to your set. You save money if you buy both lenses. The 100mm alone is $2,500 and the 135mm is $1,750, which is $4,250 total. I'm doing $3,750 for both.

LENS 1 - $2,500 or best offer
Canon 100mm f3.5 serial number: 91115
PL Mount

OPTICS
No fungus or haze, but there is dust inside, typical of an old lens. Front element is clean. Rear element has some light cleaning marks but no deep scratches, chips or pits. Overall, the optics are very good.

MECAHNICS
Excellent. Iris wheel turns smooth with no backlash.

COSMETICS
The lens looks amazing. Just a few light paint scratches. It looks great.

LENS 2 - $1,750 or best offer
135mm f2.5 serial number: 10115
This lens is ARRI Standard Mount. This lens can easily be adapted to PL using an ARRI Standard to PL adapter.

OPTICS
No fungus, but there is light haze and dust inside, typical of an old lens. Front element is clean. Rear element has some light cleaning marks but no deep scratches, chips or pits. Overall, the optics are very good.

MECAHNICS
Excellent. Iris wheel turns smooth with no backlash.

COSMETICS
Lens barrel shows signs of wear. The engravings need to be repainted.
 

Attachments

  • 001A8311.jpg
    001A8311.jpg
    39.6 KB · Views: 1
  • 001A8314.jpg
    001A8314.jpg
    62.6 KB · Views: 1
  • 001A8315.jpg
    001A8315.jpg
    76.4 KB · Views: 1
  • 001A8319.jpg
    001A8319.jpg
    71.8 KB · Views: 1
  • 001A8323.jpg
    001A8323.jpg
    80.7 KB · Views: 1
Back
Top