Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

[FS: GEAR] NEW/OPEN BOX ARRI MMB-1 TOP LOADING SYSTEM + 138mm filter ring +114mm-80mm reduction

Gabriel Winebrenner

Gabriel Winebrenner

Well-known member
Joined
Apr 13, 2008
Messages
136
Reaction score
0
Points
0
Age
49
FINAL PRICE DROP:
NEW PRICES; All items New/Open Box
Opened up three separate auctions in case people want this stuff in a bundle or al la carte.

Arri MMB-1 Top Load/138mm filter ring/80mm reduction BUNDLE: $1600
http://www.ebay.com/itm/281162136804?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Arri MMB-1 Top Load without the added accessories (K0.60115.0): $1400
http://www.ebay.com/itm/281161211792?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

NEW/Open box. I purchased this last April from CVP, a few months ago and have not used it once... Only got to mount it to the camera rods and look at it for a second or two... :(
Includes:
Arri Mini Mattebox Top Loading System K0.60115.0 (AbelCine price: $1699.00/ZGC price: $1660.00)

Arri MB-20 Size R2 Filter Ring 138mm-114mm Wide Angle K2.47190.0 (ZGC price: $295.00)

Arri Screw-in Reduction Ring R4 114mm-80mm k2.65165.0. (ZGC price: $57.00)

Subtotal at ZGC (cheaper total cost than AbelCine) =$2012

[/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h49m43s36.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h48m38s29.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h48m58s16.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h41m50s44.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h46m12s76.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h44m47s162.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h45m14s226.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h46m45s156.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/vlcsnap-2013-08-03-16h48m22s78.jpg.html][/URL[URL=http://s38.photobucket.com/user/supergrafx77/media/photo_1.jpg.html]
 
Also, I'm still getting a few emails or conversations with people mistaking this mattebox with the sideload version. Here is the vimeo link where Mitch explains the difference between the two versions of the matte box:

https://vimeo.com/14115554
 
Stephen Lovett said:
Hi Gabriel,

Sorry, I just can't tell for sure from the pictures, but it appears that this has one stage and it is a top load stage.

The configuration spoken about by Mitch in the video and listed above includes a front rotating and a rear top load stage.

I could be completely wrong in my observation, would you please clarify how many stages are included in your kit.

Thank you sir.

Steve
Click to expand...

Hi Stephen, It's the same matte box as Mitch talks about in the vimeo. The front is side load, the rear is top load. Look closely at this one picture, you can see the side load near the front and the top load knob a stage behind it.

 
Hi Gabriel,

Thank you, I edited my post after watching the video again as I was able to see it that time around. It is a lot less obvious than on the MB-20 :-)

I guess you saw my post in the five minutes it took to figure it out :-)

Sorry for any confusion.

Cheers,

Steve
 
Stephen Lovett said:
Hi Gabriel,

Thank you, I edited my post after watching the video again as I was able to see it that time around. It is a lot less obvious than on the MB-20 :-)

I guess you saw my post in the five minutes it took to figure it out :-)

Sorry for any confusion.

Cheers,

Steve
Click to expand...

:) Cheers back Stephen,

Yes, I saw your question within mere minutes as I subscribed to the thread and immediately started with a response, only to find out once I replied, your initial question had been changed. LOL

But I thought it was a good question, as you wouldn't believe how many emails I've received about people thinking I am selling a side load and not knowing that the top load exists...

I actually forgot at first when you first asked the question if the top load was in front or the second stage and had to look at the pics above again to remember. LOL

I thought your question might clear up the question, so I stickied it over at bmcuser thread as well. Ironically, it also triggered me to find out how to upload the youtube video of Mitch explaining the matte box differences in the actual ebay listing via html. So I owe you a big thank you as well.

Regards,

Gabriel
 
NEW PRICES; All items New/Open Box
Opened up three separate auctions in case people want this stuff in a bundle or al la carte.

MMB-1 Top Load/138mm filter ring/80mm reduction BUNDLE: $1675
http://www.ebay.com/itm/281162136804?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

MMB-1 Top Load (nothing else included) $1475
http://www.ebay.com/itm/281161211792?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Arri MB-20 Size R2 Filter Ring 138mm-114mm Wide Angle K2.47190.0 $250
http://www.ebay.com/itm/281161057546?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
 
You must log in or register to reply here.
Back
Top