Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Movcam Hot Swap Module issue

dean merrill

Well-known member
Joined
Nov 15, 2009
Messages
163
Reaction score
0
Points
0
Location
Portland, Maine
Website
www.swallowtailmedia.com
SOLVED
I figured out the issue was caused my a setting in my menu.

=============

Has anyone had issues with the Movcam Hot Swap module?
I place 3 ohmash brand IMR 18650 2600mah 3.7v 40A batteries into the module correctly. After attaching the module to the Scarlet W brain, and the vmount base I/O expander to the Hot Swap module I started up the camera. The camera would shut itself down after 15 seconds. It did this consistently on trying to start the camera. Please advise if this is a battery issue in the module, as the camera worked fine with the module installed without any 18650's in it.
 
Last edited:
Back
Top