Komodo X / Movi Pro / Ignite Digi Stop Start Cable for Movi Pro

[Ryan Sheets]

Just received the Ignite Digital Stop Start - https://www.ignitedigi.com.au/colle...topcable-movipro-movixl-to-red-komodo-vraptor

When using with the Komodo X on the Movi Pro and the Movi Controller the Komodo X constantly throws an error on Komodo "Record Error - Media write speed error. Please save files and secure format the media".

Happens if I am filming for roughly 5 to 10 seconds...but not every time...just most of the time.

For reference - I haven't seen that error outside of triggering it via this cable and it's on a 4TB Red CFexpress card. Also on the latest firmware for the Komodo X.

Any thoughts?

 

[Thomas B.]

Hi Ryan,

Just out of curiosity... did you follow their trigger setting instructions?

"To enable run/stop in the Freefly MōVI app, go CONFIGURATIONS > DUAL OP > ADJUSTMENTS > CAMERA TYPE > select ARRI RS."

 

[Ryan Sheets]

Hey Thomas,

Correct - Yes, we used the exact settings you mentioned above.

 

[Thomas B.]

Well.. then I'd try out a different CFexpress card / trigger cable (if you have a spare one). If this doesn't help, contact RED support / ignitedigi to hear their opinion about it.
Let's hope it's just hardware related and not a firmware issue...

 

[Ryan Sheets]

Totally - going to test again tomorrow with my other card. (Don't have a second trigger cable). In a chat with Ignite digi - their Komodo is working well with the cord via the MoviPro, but they don't have the Movi controller to test with. Going to look at my firmware for Movi and Movi controller.