Is ts normal?

[Luca Volpe]

Hi guys I have done the sensor calibration after I got my camera and tonight I did some shot at 1,600 iso and I noticed this strange lines. Then I checked with the lens cap and flut at 8000 and I see green vertical lines...is this normal? The temperature is not changed where I live and the T/E was always green.
thanks

 

[Matthew Quinn]

What olpf are you using? Also I notice you are not recording Redcode. But it does seem a bit strange

 

[Luca Volpe]

Standard olpf and yes only pro-res but I dont think will make the difference. I just did a sensor calibration and is still the same from 1600iso....but I have another problem, when I move the camera the screen split, here is the video
https://youtu.be/UyvuOFrC7wA

I have reboot and now is ok but is not normal....

 

[Mike P.]

Update the firmware, as I think they alleviated the splitscreen/tearing in a recent build.

As for the lines, check the footage at full-res on a computer (I've seen similar "artifacts" creep up just on the monitor path due to a combination of display and raw settings, but the captured footage is pristine.)

And, yes, quirks like these are normal (you'll get used to them).

 

[Luca Volpe]

Mike it is the latest firmware but happened after the sensor calibration, then I restarted the camera and was ok, also the starnge thing is that now the temperature is set to 40 before the blackshading was set to 38... Is it possible that chenge by itself??
this is the picture of the ful to 8000 after the BS: