Group Purchase for O'Connor etc.

[Shawn Nelson]

Sorry I haven't read this whole thread, but what prices are in this deal for a Cine HD Aluminum and Cine HD Baby Aluminum sticks? Thanks!

 

[Ketch Rossi]

Sorry I haven't read this whole thread, but what prices are in this deal for a Cine HD Aluminum and Cine HD Baby Aluminum sticks? Thanks!

Hey Shawn,

You got to talk to BJ, same contact info I sent you for the filters deal.

About$ 1,500 each.

Ciao

KETCH ROSSI

 

[Ivan G]

Well luckily for me I won't be using a 35mm setup :sarcasm: So I think the 150 bowl will work perfect for quick leveling etc. I mean how much would a full blown RED weigh, 45 lbs? I'm hoping the 2060 should be a perfect match. I also purchased the mitchell mount just in case.

 

[Unwounded]

I'd stray away from adapters in all.......

With all O'Connor heads, you have the ability to remove the tie die for the base that is currently strapped to your head and swap it for another base.

That's the exact reason I purchased my 2060 with a 150mm bowl.....

Leveling is much, much, much more simple with a bowl mount, and just as sturdy as Mitchell if well cared for......

Then if and when a show calls for tons of Mitchell work (Dolly, Jib) I strap the Mitchell base and tie down on and it's a Mitchell now.

How easy is it to change from bowl mount to mitchell? a couple of minutes in the field or something you do in the shop the day before? Is it practical to buy the head with a ball mount and then buy the mitchell mount as well? How much does the other mount cost? Could you describe exactly what you mean by the tie down? Thanks.

 

[Ivan G]

If I remember correctly B.J. said it was a matter of minutes to swap mounts.

I believe the mitchell mount was around $350.00 but I'd have to double check the invoice.

 

[Alexander Nikishin]

How easy is it to change from bowl mount to mitchell? a couple of minutes in the field or something you do in the shop the day before? Is it practical to buy the head with a ball mount and then buy the mitchell mount as well? How much does the other mount cost? Could you describe exactly what you mean by the tie down? Thanks.

It takes about 5 minutes to change from a bowl to Mitchell mount and can be done in the field no problem. Either mount is held down by 4 hex bolts at the bottom end that can be removed. Both the 150mm bowl and Mitchell mount have tie downs. The tie down for the 150mm bowl mount acts as your fastener to the tripod when leveling. It's the piece you are always unscrewing and re-screwing when leveling your ball head. The tie down for the Mitchell mount is more of a permanent fastener which locks the head and Mitchell base together.

IMO it's very practical and ideal to purchase both mounts....I find myself having days where I'm on a dolly more often than sticks and that lends the Mitchell mount its merits.

As David said, if you're shooting on a monstrous camera such as a Panavision Millenium, a Mitchell mount is ideal, but for a RED setup, even if it is fully decked out with a heavy zoom, your rig will weigh no more than 50-60lbs. Thus making a 150mm bowl more than solid enough for use with a RED and IMO the ideal mount as it allows for quick and easy leveling while maintaining a secure base.

If memory serves me correct, the Mitchell or 150mm bowl mount w/tie down for the 2060 run for about $400-$500. Long story short, buy a 150mm bowl, your AC will love you for it, so will your tripod leg locks!

 

[Andrew Benz]

Zombie Thread... but good info for those in need of a tripod system

Zombie Thread... but good info for those in need of a tripod system

Just got off the phone with B.J. and prices for O'Connor are still great... as a matter of fact, prices for Satchler, Miller and O'connor tripod system are quite good.

I thought I would bring this up since we have loads of cameras that have just been delivered and I thought many of you might be in the same boat as myself. The great thing about dealing with B.J. is that even if you feel that you are solid on your decision, he will go over other similar options within that price range to make sure that "you" are making the best decision based on your background work, your current/future needs and expectations. B.J. works hard to find the right fit for each customer. Pushing a brand is not his concern... he can get almost anything, but is quick to point out others who may have a better price or a product that he cannot offer. A bit of front end communication goes along way to make sure any decisions made are right the first time.

Personally, I feel B.J. is an incredible resource... Former Broadcast Engineer who always liked hanging out with the photogs-- how the hell does that happen?

I thought others would appreciate the latest info. I hope this helps others who are in the same boat looking for answers.

A big thanks to Steve Tammi for starting this thread and helping push a great way for Red Users to get both great information and fantastic prices.

Cheers,

Andrew

PS--Full disclosure. No connection to Custom Supply or B.J. Purcell. My decision is based on extensive research (the net, speaking to other customers and learning of their experiences... not to mention my personal experience w/ other purchases) and speaking to many other Equipment Sales companies to get quotes/info. I am very happy to spend my hard earned coin with B.J. and Custom Supply. It is a similar experience to working with Stephen Pizzo at Element Technica. Just great people...

 

[Peter Richardson]

Just got off the phone with B.J. and prices for O'Connor are still great... as a matter of fact, prices for Satchler, Miller and O'connor tripod system are quite good.

I thought I would bring this up since we have loads of cameras that have just been delivered and I thought many of you might be in the same boat as myself. The great thing about dealing with B.J. is that even if you feel that you are solid on your decision, he will go over other similar options within that price range to make sure that "you" are making the best decision based on your background work, your current/future needs and expectations. B.J. works hard to find the right fit for each customer. Pushing a brand is not his concern... he can get almost anything, but is quick to point out others who may have a better price or a product that he cannot offer. A bit of front end communication goes along way to make sure any decisions made are right the first time.

Personally, I feel B.J. is an incredible resource... Former Broadcast Engineer who always liked hanging out with the photogs-- how the hell does that happen?

I thought others would appreciate the latest info. I hope this helps others who are in the same boat looking for answers.

A big thanks to Steve Tammi for starting this thread and helping push a great way for Red Users to get both great information and fantastic prices.

Cheers,

Andrew

PS--Full disclosure. No connection to Custom Supply or B.J. Purcell. My decision is based on extensive research (the net, speaking to other customers and learning of their experiences... not to mention my personal experience w/ other purchases) and speaking to many other Equipment Sales companies to get quotes/info. I am very happy to spend my hard earned coin with B.J. and Custom Supply. It is a similar experience to working with Stephen Pizzo at Element Technica. Just great people...

I second everything Andrew wrote here. BJ and Custom Supply are the best -- best prices, best customer service. MAJOR thanks to Steve for introducing us all to these wonderful folks.

Peter

 

[Mitch Gross]

I'm sure BJ offeres great prices and service, but I'd ask that some of you give Abel a shot as well. If you feel that BJ offers better pricing or handles your needs better, then please by all means go with him. But we do aim to please and have worked directly with several manufacturers to offer special pricing. Just thought I'd give it a shot...

 

[Michael "Dorkman" Scott]

I was actually just about to give a shout-out to Abel here.

I went in to Abel to pick up my O'Connor head and sticks and the guys there were extremely helpful. When they found out I was buying it for a RED package they actually mentioned a package that they had specifically for RED users, one which wound up saving me thousands over even the cheapest prices I'd found online.

Apparently the demand from RED users is higher than O'Connor anticipated and some of the pieces of the puzzle have been on backorder for a while. Abel has been very conscientious about keeping me apprised on the situation and has even helped me out with alternative solutions in the meantime.

James is my guy in L.A. and I'm very happy with my experience at Abel. I highly recommend checking them out.

 

[Peter Richardson]

I'm sure BJ offeres great prices and service, but I'd ask that some of you give Abel a shot as well. If you feel that BJ offers better pricing or handles your needs better, then please by all means go with him. But we do aim to please and have worked directly with several manufacturers to offer special pricing. Just thought I'd give it a shot...

Yep, no disrespect meant against Abel -- you guys are great and I've certainly bought a fair amount of gear (including my first OConnor head) from you guys.

Peter

 

[Andrew Benz]

Yep, no disrespect meant against Abel -- you guys are great...

Peter

I absolutely agree... if I lived on either coast and had the need to rent often then that relationship would certainly translate into sales. But, I live in the South and rent from Dallas.

I always appreciate Mitch's contributions here and at xxx.com. I certainly hope that I did not step on anyones toes. I was just really happy with my experience with B.J. and thought others would appreciate first hand, honest feedback from someone who has nothing to gain from it but maybe a little forum goodwill.

O.K. back to the salt mines...

Andrew

PS- Peter, I hope your doing well and am very glad to hear that things are going well for you as well. I look forward to seeing your rig with a nice Fujinon on it...

 

[Mitch Gross]

Andrew, certainly I took no offense. I'm glad B.J. did well by you. I just wanted to throw Abel's hat in the ring as well.

 

[Peter Karlsson]

Does anyone have an email adress to customsupply?!? Im sorry, but fax is not something I´ve used the last 10 years :I

/Regards Peter K

 

[david farland]

BJ Purcell at bjp@mediasupplystore.com

Cheers,

 

[Peter Karlsson]

Thanks!

 

[Pawel Achtel]

I always appreciate Mitch's contributions here and at xxx.com.

Ahmmm, Andrew, I don't doubt Abel's abilities for a minute, but I don't think that the legs offered at xxx.com were contributed by Mitch :w00t: Nice legs, though.

 

[Andrew Benz]

Ahmmm, Andrew, I don't doubt Abel's abilities for a minute, but I don't think that the legs offered at xxx.com were contributed by Mitch :w00t: Nice legs, though.

Pawel, that's brilliant and well deserved!

On another note, I hope that you got a Red for your very important wildlife shoot. I was thinking about your predicament when I was watching BBC Earth the other night hoping you had a solution for your project.

Cheers,

Andrew

 

[Mitch Gross]

Uh oh, has my secret life been revealed?

 

[Pawel Achtel]

On another note, I hope that you got a Red for your very important wildlife shoot. I was thinking about your predicament when I was watching BBC Earth the other night hoping you had a solution for your project.

Thanks Andrew. The support of this community and Red Team were amazing. I expect my camera to arrive very soon. The shoot is on and scheduled to start on 12 of June. I am packing and panicking already.

Uh oh, has my secret life been revealed?

Good to know you can supply "other legs" too, Mitch. Just got a quote from Abel's Jerrod Haarstad and, boy, it is looking hot...