GEMINI Sensor Temperature ISSUE

[Edy Martinez]

Yesterday my Gemini get crazy Hot mostly was in
57/57/ or 60/60 with the "T" on red color, my Fans was on 39. Adaptive mode, & the temperature of my office was on 66 Fahrenheit i just leave the camera warm up like 30 minutes & never change the sensor temperature.

im upgrade the firmware & see if that would works but noting change.

I decide to run a Blackshading on this temperature 57/60
i know is to bad but at least i get back the "T & E" on green.

Any way o shot some test here is the link below if you guys want take a look, if would be safe to keep the sensor on that temperature?

Any advice let me know

Thanks!

Footage was shot on:
ISO 800 Std & 1600 & 3200 LL
Lens 50mm 2.0F


http://www.reduser.net/forum/attachment.php?attachmentid=122355&stc=1&d=1586714066

Footage: https://we.tl/t-ewUhdMXlAU



Edy Martinez
2430norte@gmail.com
IG: edymartinezdp
www.2430nortefilms.com

 

[Patrick Tresch]

On my Dragon I put 46c callibration temp.

 

[luigivaltulini]

I also had a similar problem with Gemini, but it was a day in full sun and very hot.
I think I also detached all the modules. I do not remember........
I think I reset the whole camera, canceled all the blackshading and made a manual 180 degree shutter at a temperature of 42-43 degrees.

Does this problem do it both connected to the power and to the battery?

 

[Edy Martinez]

Hey Luigi, the issue is on it no matter if i use the Battery or DC Power, how do you fix it?

Edy

 

[Jay Ho]

If the "T" indicator is going red then you're out of the recommended temperature range and may have issues.

It's probably worth submitting a ticket at support.red.com to run a log file by RED.