FS - LOMO anamorphic roundfront F = 50, 75,100,150 - PL mount

[Sergey Kravchenco]

For sale LOMO roundfront anamorphic lenses F = 50/2 , F = 75/2 , F = 100/2.8 , F = 150/2.8 . Lenses has stainless steel PL mount and ARRI standard 32 pitch ( module 0.8 ) focus gear ring . Scale marked in meters .Lenses clean , has no fungus or dirty inside , multicoating fine - not damage .Lenses has front and rear caps .Has support for heavy lens and 15 mm rods .Yuo can buy all set or any anamorphic lens separately .
F = 50/2 - $ 2500
F = 75/2 - $ 2500
F = 100/2.8 - $ 2800
F = 150/2.8 - $ 3100
F = 500/5.6 - $ 2800
LOMO anamorphic roundfront Superspeed lenses ( conversion ):
F = 50/1.2 - $ 4900
F = 75 / 1.5 - $ 4900

Below you can see photos of lenses .
If you have any question or additional photos - please contact with me .

sergastr@list.ru

sergastr@yahoo.com

Best regards

Sergey
------------------------------------------------------
P.S - Anamorphic Zoom lenses for sale :

- Superspeed Anamorphic Zoom lens 35OPF19-1A F = 40-120/2.5 - $ 10000

- Anamorphic Zoom lens 35OPF-P1 F = 50-150/2.2 - $ 8000
With anamorphic adapter F = 100-300/3.5

- LOMO Anamorphic Zoom lens “FOTON” F = 37 – 140 / 3.5 - $ 1600


- Rear anamorphic adapter for Zoom lens Angenieux HR 25-250 ,
Angenieux HP25-250 , Cooke MKI 25-250 , Cooke MKII 25-250


- New ELITE Anamorphic zoom lens F = 50-160/4.2 - $ 8500 - with warranty

http://www.reduser.net/forum/showthread.php?t=36916

- New Ecran Anamorphic Zoom lens 35OPF29 – 1A - $ 4500
With 2 additional front extenders and rear PL mount – it is possible used without anamorphic adapter – F = 25-80

http://www.reduser.net/forum/showthread.php?t=31543

Zoom lens 35OPF18-1A – F = 40 – 240 with rear anamorphic adapter ( New ) - $ 7500

With 2 additional rear extenders

 

[Sergey Kravchenco]

Additional photos Lens F = 50/2

Additional photos Lens F = 50/2

Additional photos of LOMO anamorphic prime lens F = 50/2 type 35BAS22-1

 

[Sergey Kravchenco]

Additional photos of Superspeed anamorphic lens F = 50/1.2

Additional photos of Superspeed anamorphic lens F = 50/1.2

Additional photos of Superspeed anamorphic lens F = 50/1.2 - it is conversion lens .

 

[Sergey Kravchenco]

Additional photos of Superspeed anamorphic lens F = 100/2.8

Additional photos of Superspeed anamorphic lens F = 100/2.8

Additional photos of Superspeed anamorphic lens F = 100/2.8

 

[Eric.T]

do you also clean and remount existing lenses ? how much would it cost ?

 

[Eric.T]

hi i will have a couple of diffrent lenses to remount and maybe to clean inside by the beginning of next year.
i let you know when i have all the details

 

[Sergey Kravchenco]

Hi Eric !
Our opticians make conversion any lens on PL mount including very difficult conversions lenses that has BNCR , Nikon or Canon mount .Below I am attach some photos .
Regarding your question - please inform me more exactly list of lenses that you have for conversion on PL mount and I shall inform you about prices .If you have LOMO anamorphic roundfront then I can send you ready submount with reverse thread and stainless steel PL ( rear part of anamorphic lens ) and you could himself to unscrew old submount with OCT - 19 mount and then fixed new with PL and after will check up back focus on collimator and optical bench .

Best regards

Sergey

 

[Sergey Kravchenco]

Additional photos of anamorphic lens F = 150/2.8

Additional photos of anamorphic lens F = 150/2.8

Additional photos of anamorphic lens F = 150/2.8

 

[Sergey Kravchenco]

Still for sale ...

 

[Sergey Kravchenco]

Conversion LOMO anamorphic roundfront on PL mount

Conversion LOMO anamorphic roundfront on PL mount

Hi !
If you have LOMO anamorphic roundfront with OCT - 19 mount ( Konvas 2M , Kinor 35 movie cameras ) and you want to make conversion it lens on PL mount then you can make conversion of your LOMO anamorphic lens independently . It is necessary to unscrew old submount with OCT - 19 mount and to put new submount with PL .Pl mount made from stainless steel , submount made from hard aluminum - black anodized .
I have in stock submounts with PL for standard LOMO roundfront lenses :
- F = 35/2.5 - type 35BAS27 - 1
- F = 50/2 - type 35BAS22-1
- F = 75/2 - type 35BAS23 - 1
- F = 100/2.8 - type 35BAS25 - 1
Price of new submount with stainless steel PL - $ 400
After conversion you MUST to test FFD lens on collimator or optical bench.

Best regards

Sergey
sergastr@list.ru
sergastr@yahoo.com