Mike Milia
Member
- Joined
- Aug 22, 2013
- Messages
- 9
- Reaction score
- 0
- Points
- 0
Hello and thank you for viewing our post. We are selling the following products for a reasonable price. Please look through it and if anything peaks your interest feel free to reach out to discuss pricing.
1-Black Magic 4k Digital Cinema camera
1-BMDC AC Power Supply
2-500GB Crutial SSD's
1-x quick cage
1-x A-Box for bmdc
1 set-15mm Rods
1-15mm x Anton Bauer plate
1-x NATO handle
O'connor O-Box WM Matte Box
Top Flag
2-4x4" Filter Frames
2-4x5.65" Filter Frames
1-19mm LWS Rod Bracket
O-Box WM Side Flag Bracket Set (2 Brackets)
OConnor - Clamp Ring (150-80mm)
OConnor - Clamp Ring (150-114mm)
OConnor - Clamp Ring (150-95mm)
OConnor - Studio Adapter (19mm)
Arri FF4
2-marking disks
2-FF knobs
1-removable 15-19 adapter
1-12" whip
1-speed crank
Teradek Bolt Pro 2000
1-Transmitter
1-Reciever
1-ptap cable for TX
1-AC Power Supply for RX
2-short BNC cables
1-Baby pin receiver with 1/4-20 for RX
1-1/4-20 lock down knob for TX
Bartech
1-Remote Focus Hand Unit
1-Analog Receiver (Manual Calibration)
1-M-One Motor
Rod Collets: 5/8”, 15 mm, 1/2", 19mm w/o a collet.
Lens Gears: Module/Pitch 0.8m-32P, 0.6m, 48P, 0.5m, 0.4m-64P, extra wide 0.8m-32P.
Mounting Brackets: 19 mm universal mounting bracket, Will mount on either side of motor in either direction.
1-2.5” universal extension/offset bracket with 19mm attachment tubes (1.12” & 2.12” long)
1-Motor cable: 58 cm (23”) long
1-ptap power cable
1-XLR to 2P Lemo Power adapter
3-marking disks
O'Connor 1030 Head and 30L Sticks
1-Dog leg/Pan arm
1-Wedge plate
1-1/4-20 screw
1-3/8-16 screw
1-case with wheels
If you would like to find out more info or discuss pricing please contact Mike.
Mike:
Mike@NYCJIBS.com
917-669-8141
1-Black Magic 4k Digital Cinema camera
1-BMDC AC Power Supply
2-500GB Crutial SSD's
1-x quick cage
1-x A-Box for bmdc
1 set-15mm Rods
1-15mm x Anton Bauer plate
1-x NATO handle
O'connor O-Box WM Matte Box
Top Flag
2-4x4" Filter Frames
2-4x5.65" Filter Frames
1-19mm LWS Rod Bracket
O-Box WM Side Flag Bracket Set (2 Brackets)
OConnor - Clamp Ring (150-80mm)
OConnor - Clamp Ring (150-114mm)
OConnor - Clamp Ring (150-95mm)
OConnor - Studio Adapter (19mm)
Arri FF4
2-marking disks
2-FF knobs
1-removable 15-19 adapter
1-12" whip
1-speed crank
Teradek Bolt Pro 2000
1-Transmitter
1-Reciever
1-ptap cable for TX
1-AC Power Supply for RX
2-short BNC cables
1-Baby pin receiver with 1/4-20 for RX
1-1/4-20 lock down knob for TX
Bartech
1-Remote Focus Hand Unit
1-Analog Receiver (Manual Calibration)
1-M-One Motor
Rod Collets: 5/8”, 15 mm, 1/2", 19mm w/o a collet.
Lens Gears: Module/Pitch 0.8m-32P, 0.6m, 48P, 0.5m, 0.4m-64P, extra wide 0.8m-32P.
Mounting Brackets: 19 mm universal mounting bracket, Will mount on either side of motor in either direction.
1-2.5” universal extension/offset bracket with 19mm attachment tubes (1.12” & 2.12” long)
1-Motor cable: 58 cm (23”) long
1-ptap power cable
1-XLR to 2P Lemo Power adapter
3-marking disks
O'Connor 1030 Head and 30L Sticks
1-Dog leg/Pan arm
1-Wedge plate
1-1/4-20 screw
1-3/8-16 screw
1-case with wheels
If you would like to find out more info or discuss pricing please contact Mike.
Mike:
Mike@NYCJIBS.com
917-669-8141