Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Cheap Vmount Solutions

jake southard

Well-known member
Joined
Apr 29, 2014
Messages
705
Reaction score
9
Points
18
Location
Beverly Hills, CA
Website
www.jakesouthard.net
I haven't used that, but it doesn't look bad for the price, if you don't need more output options to power more accessories.

There are a bunch out there, so it just depends on how many other accessories you want to power.
I use a Switronix JetPack, mainly because I wanted to also power a monitor via P-Tap to XLR and REDmote via USB, and audio recorder via lemo. I've since sold some of those accessories, so it's a little overkill, but better to be safe for the future.
 
I haven't used that, but it doesn't look bad for the price, if you don't need more output options to power more accessories.

There are a bunch out there, so it just depends on how many other accessories you want to power.
I use a Switronix JetPack, mainly because I wanted to also power a monitor via P-Tap to XLR and REDmote via USB, and audio recorder via lemo. I've since sold some of those accessories, so it's a little overkill, but better to be safe for the future.



Yes yes I looked into the jetpack. Seems like everything else (besides this Camtree) requires some sort of other plate to attach to the camera. Such as the WC fixed mount.
The camtree is fits right on.. Which is awesome.
but yea, definitely minimalistic for sure. I'd have a battery with a dtap so at least you can plug something else in there
 
Yeah, that's convenient how the Camtree mount fits without an adapter plate. Plus it has one p-tap according to the photos, so it looks like a good buy for saving $.
I use a Camtree shoulder rig and cage that I like.
 
That's pretty sweet looking. The only concerns I would have about it is the quality of the v-mount plate (IDX makes the best by far and really worth every penny) and if the LEMO is actually a real lemo connector and wired correctly.
 
These look like the version 1 Viewfactors. They had a flaw as there were no way to keep them from popping up and off the screw. Like a picture frame hanging on the wall, the screw holds the picture up but doesn't prevent it from being pushed up and off. That's the case with these v-mount plates. It can be bumped up and then yanked off the camera when handholding. It's very annoying and not very safe.

I wouldn't recommend them.
 
I have the Camtree plate and it works just as well as any other. I also have their matte box, shoulder rig, cage, A box and follow focus. I can't fault any of it. I imagine Tilta hates Camtree much the way Zacuto must hate Tilta. It really is pretty good stuff. The only thing I have found of rather poor quality, is their hard cases. The copy of the Pelican hard case is spot on, but the foam is cut by hand (at least on the ones I bought) and is rather shoddy to be honest. However, at about 330 bucks including shipping from India for two cases to cover all their gear it is what you'd expect. Will get the job done. I should mention that the plate mounts nicely on the screws provided, but they have to all be screwed in EXACTLY the same amount to fit. Also, hand tight is as far as I would go.
 
I own the Camtree Hunt's Quick Back for a while and it works great! The only thing is that the V-mount is a bit loose and the battery moves a bit.
It works great and for the price is great!
 
I own the Camtree Hunt's Quick Back for a while and it works great! The only thing is that the V-mount is a bit loose and the battery moves a bit.
It works great and for the price is great!

I figured that by looking at it... theres no other way to fasten it down once it pops on, figured there would be a bit of play. but as long as it doesnt POP off like WIL said, I might be buying one in the near future just because of how cheap it is :/
 
I'm using it.
Didnt clip on perfectly at first so i had to leave one of the bolts slightly looser than the rest. but thats not an issue, its still tighter than finger tight so i shouldn't come loose.
The battery connectors only have the +- terminals so you not going to get any info other than battery voltage.
I wired a 5v BEC from a hobby store to a usb plug into the side of it so i can charge my phone/ power a video transmitter straight off the plate. I'm going to do the same with a 12v one also for extra monitors/ other stuff that only wants 12v.
Its got a D-tap.
I'm not sure if its a legit Lemo, but it feels good and works 100% no issues plugging it in or out.
So i'm happy so far.
Hope this helps
Jimmy
 
Just an update, for anyone thats looking at this vmount system... DON'T buy it. Just received it today and it mounts to the camera perfectly... but when you put batteries on it, they do NOT lock into place at all. a gentle push upwards and out will un"click" the battery right off the plate. Does not keep the V-mounts secure at all. Returning the piece of garbage. Tried multiple brands of Vmount batteries, none of them would stay on.
 
The cheapest solution in my opinion is probably the WC company. The company we don't talk about here on this forum but hope you know what I mean. There might also be lots of used ones for sale once Weapon comes out. Weapon may not fit the old style of DSMC modules and third party accessories.
 
Be ware of the generic Chinese knock-off V-mount plates. I bought one with multiple voltage outputs to power different devices.

After it smoked an onboard monitor I decided to check the outputs. The "7.2 volt" socket for Canon 5D power supplied 12 volts. The "5 volt" USB was 10 volts. Etc. There were no fuses on any outputs.

You get what you pay for.
 
Back
Top